Magnesium oxide whiskers

Table 3.6 Physical and Chemical Properties of Magnesium Oxide Whiskers...

Additives used in final products Fillers barium and strontium ferrites, boron carbide, calcinated clays, calcium carbonate, carbon black, carbon-silica dual phase filler, clays, dolomite, fumed silica, iron oxide, magnesium aluminum silicate, magnesium carbonate, mica, montmorillonite, nickel zinc ferrite, nylon fibers, pulverized polyurethane foam, quartz, silica carbide, soapstone, talc, zinc oxide Plasticizers naphthenic oil, polybutene, aromatic oil, esters of dicarboxylic acid Plasticizers adipates, aromatic mineral oil, paraffin oil, phosphates, phthalates, polyethylene glycol, processing oil, sebacates Antistatics dIhydrogen phosphate of 8-amlnocaprolc add. Iodine doping Antistatics carbon black, quaternary ammonium salt, zinc oxide whisker Antiblocking diatomaceous earth Release propylene wax Slip erucamide+stearamide ... 

Metals and ceramics (claylike materials) are also used as matrices in advanced composites. In most cases, metal matrix composites consist of aluminum, magnesium, copper, or titanium alloys of these metals or intermetallic compounds, such as TiAl and NiAl. The reinforcement is usually a ceramic material such as boron carbide (B4C), silicon carbide (SiC), aluminum oxide (A1203), aluminum nitride (AlN), or boron nitride (BN). Metals have also been used as reinforcements in metal matrices. For example, the physical characteristics of some types of steel have been improved by the addition of aluminum fibers. The reinforcement is usually added in the form of particles, whiskers, plates, or fibers. 

The superalloys, as well as alloys of aluminum, magnesium, titanium, and copper, are used as matrix materials. The reinforcement may be in the form of particulates, both continuous and discontinuous fibers, and whiskers concentrations normally range between 10 and 60 vol%. Continuous-fiber materials include carbon, silicon carbide, boron, aluminum oxide, and the refractory metals. However, discontinuous reinforcements consist primarily of silicon carbide whiskers, chopped fibers of aluminum oxide and carbon, or particulates of silicon carbide and aluminum oxide. In a sense, the cermets (Section 16.2) fall within this MMC scheme. Table 16.9 presents the properties of several common metal-matrix, continuous and aligned fiber-reinforced composites. 

---