Localized pressure, velocity conversion

Figure 52.3 will read higher than Pj, due to dynamic pressure— the conversion of velocity into localized pressure. 

Early SBCR models were reviewed by Ramachandran and Chaudhari (5) and by Deckwer (9). They require hold-up correlations as an input and do not compute flow patterns. The most complete and useful of these models applied to the Fischer-Tropsch (F-T) conversion of synthesis gas in a SBCR is that of Prakash and Bendale (79). They sized commercial SBCR for DOE. They gave syngas conversion and production as a function of temperature, pressure and space velocity. Input parameters with considerable uncertainty that influenced production rates were the gas hold-up, the mass transfer coefficient and the dispersion coefficient. Krishna s group (77) extended such a model to compute product distribution using a product selectivity model. Air Products working with Dudukovic measured dispersion coefficients needed as an input into such model. The problem with this approach is that the dispersion coefficients are not constant. They are a function of the local hydrodynamics. 

---