Lithium triethyl borohydride

Double bonds of benzene and related aromatic compounds do not react with diazoalkanes in 1,3-cycloadditions. The corresponding benzo-annellated dihydro-pyrazoles such as (1 a,6a)-6,9,9-trimethyl-7,8-diazabicyclo[4.3.0]nona-2,5,7-triene (6.98, R = H) can be synthesized, however, from methyl cyclohexa-l,4-dienecarboxy-late (6.97, R = H), as shown by Klarner et al. (1990). The reduction of the ester group to a methyl group was carried out with di-isobutylaluminum hydride (DIBAL-H), esterification of the OH group with methanesulfonyl chloride and reduction with lithium triethyl borohydride. The second double bond was introduced by bromina-tion with Br2 on a polymeric carrier after Bongini et al. (1980). Cycloaddition with 2-diazopropane in ether at -- 5 °C and the following steps gave 6.98 in a yield of 58%. 

Two approaches for the synthesis of nanostructured M50 type steel (composed of 4.0% Cr, 4.5% Mo, 1.0% V, 0.8% C and balance Fe) powders and their consolidation are reported in this chapter. One approach involved the sonochemical decomposition of organometallic precursors and the other involved the reduction of the metal halides with lithium triethyl borohydride followed by vaccum sublimation of the powders to remove lithium chloride. The as-synthesized powders are amorphous by X-ray diffraction (XRD) but the peaks corresponding to bcc a-Fe are observed in the compacts. The morphology and composition of the powders synthesized by both techniques, as well as the compacts, were examined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Hardness, density, particle size and impurity contents were also determined for the compacts. In addition, pure nanosized iron particles obtained by the ultrasound decompositon of iron pentacarbonyl were consolidated and the properties of the latter were studied. 

Access to 6-deoxy-D-glucose is obtainable through l,2 3,5-di-0-methylene-6-C>-toluene-p-sulphonyl-a-D-glucofuranose which was reduced in high yield to the 6-deoxy compound with lithium triethyl borohydride, and 6-deoxy-o-a//ro-heptose was made as outlined in Scheme 5. The catalytic hydrogenation... 

Preparation.—The reduction of elemental sulphur with lithium triethyl-borohydride in THF using appropriate stoicheiometries is known to produce... 

The utility of lithium and potassium tri-s-butylborohydrides and lithium triethyl-borohydride as reagents for the conjugate reduction and reductive alkylation of unsaturated ketones and esters has been surveyed. ... 

---