Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Cyclic linear sweep voltammetry

Then appears linear sweep rate voltammetry in which the electrode potential is a linear function of time. The current-potential curve shows a peak whose intensity is directly proportional to the concentration of electroactive species. If the potential sweep takes place in two directions, the method is named cyclic voltammetry. This method is one of the most frequently used electrochemical methods for more than three decades. The reason is its relative simplicity and its high information content. It is very useful in elucidating the mechanisms of electrochemical reactions in the case where electron transfer is coupled... [Pg.163]

The characterization of pure platinum catalysts and of Pt catalysts modified by lead was achieved in situ by linear potential sweep cyclic voltammetry. This technique allowed to measure the active platinum surface area in the absence and in the presence of deposited lead and to determine the surface fraction covered by lead adatoms (9-12). The adsorption stoichiometry of lead on platinum was also evaluated by electrochemical techniques and found to be equal to two (one lead atom covers two platinum atoms on the surface) (II). [Pg.613]

Linear Sweep, Cyclic and Sqnare Wave Voltammetry (LSV, CV, SWV)... [Pg.6453]

As it can provide some of the most basic electrochemical information related to the reactivity of the selected analyte (peak potential and peak current) most instruments that perform amperometry can also perform some of the most basic voltammetric techniques. These techniques determine the current as a function of the potential applied to the WE (in a conventional three-electrode cell) and can be performed with relatively simple instrumentation [105,106]. As different signals can be combined in the input ports of the instrument, multiple variations of the technique have been developed including cyclic voltammetry, linear sweep voltammetry, linear sweep stripping voltammetry, stripping voltammetry [107, 108], fast-scan cyclic voltammetry [109], square-wave voltammetry [110],and sinusoidal voltammetry [111]. [Pg.447]

Linear and cyclic voltammetry is widely used both for analytieal application and for investigating the mechanisms and kinetics of various electrochemical systems [1-4]. In order to study electrochemical behavior of a redox couple, different parameters determined the view of voltammetric response, may be changed (e.g. sweep rate, bulk concentrations, hydrodynamic conditions, geometry and size of the utilized electrode, and so on). Meanwhile,... [Pg.319]

The Model 384B (see Fig. 5.10) offers nine voltammetric techniques square-wave voltammetry, differential-pulse polarography (DPP), normal-pulse polar-ography (NPP), sampled DC polarography, square-wave stripping voltammetry, differential pulse stripping, DC stripping, linear sweep voltammetry (LSV) and cyclic staircase voltammetry. [Pg.336]

Methods employing individual linear or triangular pulses (potential-sweep, triangular pulse and cyclic voltammetry, sometimes also called... [Pg.305]

Figure 2.15 Schematic representation of the equipment necessary to perform linear sweep voltammetry LSV) or cyclic voltammetry CV). WFG waveform generator, P potentiostat, CR chart recorder, EC electrochemical cell, WE working electrode, CE counter electrode, RE... Figure 2.15 Schematic representation of the equipment necessary to perform linear sweep voltammetry LSV) or cyclic voltammetry CV). WFG waveform generator, P potentiostat, CR chart recorder, EC electrochemical cell, WE working electrode, CE counter electrode, RE...
Thus, cyclic or linear sweep voltammetry can be used to indicate whether a reaction occurs, at what potential and may indicate, for reversible processes, the number of electrons taking part overall. In addition, for an irreversible reaction, the kinetic parameters na and (i can be obtained. However, LSV and CV are dynamic techniques and cannot give any information about the kinetics of a typical static electrochemical reaction at a given potential. This is possible in chronoamperometry and chronocoulometry over short periods by applying the Butler Volmer equations, i.e. while the reaction is still under diffusion control. However, after a very short time such factors as thermal... [Pg.180]

The redox characteristics, using linear sweep and cyclic voltammetry, of a series of (Z)-6-arylidene-2-phenyl-2,3-dihydrothiazolo[2,3-r][l,2,4]triazol-5(6//)-ones 155 (Figure 24) have been investigated in different dry solvents (acetonitrile, 1,2-dichloroethane, tetrahydrofuran (THF), dimethyl sulfoxide (DMSO)) at platinum and gold electrodes. It was concluded that these compounds lose one electron forming the radical cation, which loses a proton to form the radical. The radical dimerizes to yield the bis-compound which is still electroactive and undergoes further oxidation in one irreversible two-electron process to form the diradical dication on the newly formed C-C bond <2001MI3>. [Pg.228]

Parker, V. D. Precision in Linear Sweep and Cyclic Voltammetry, in Electronalytical Chemistry, Bard, A. J., Ed., Marcel Dekker New York, 1985, Vol. 14. [Pg.75]

Cyclic voltammetry belongs to the category of voltammetric techniques based on a linear potential sweep chronoamperometric technique. It certainly constitutes the most useful technique for a preliminary determination of the redox properties of a given species. [Pg.50]

In linear sweep voltammetric techniques the applied electrode potential is varied from an initial value E to a final value f at a constant scan rate v (single sweep voltammetry). Once the value is reached the direction of the scan can be reversed, maintaining the same scan rate v, and the potential brought back to the initial value (cyclic voltammetry). In the two cases the form of the potential-time impulse can be represented as shown in Figure 1. [Pg.50]

Figure 1 Potential-time pulses in (a) linear sweep voltammetry (b) cyclic voltammetry. The slope of each line measures the potential scan rate... Figure 1 Potential-time pulses in (a) linear sweep voltammetry (b) cyclic voltammetry. The slope of each line measures the potential scan rate...
In contrast to linear single sweep or cyclic voltammetry, which give non-symmetric peaks, DPV affords symmetric peaks which start from zero-current values and finish at zero-current values, see Figure 39. [Pg.111]

Linear sweep and cyclic voltammetry (LSV and CV) are probably the most widely used techniques to investigate electrode reaction mechanisms. They are easy to apply experimentally, readily available in... [Pg.10]

Fig. 5 Linear sweep and cyclic voltammetry (a) dotted lines five profiles respectively at various typical excitation signal (b) current response times, increasing time shown by arrows] for a and concentration profiles [(c) forward scan cyclic voltammetric experiment. Fig. 5 Linear sweep and cyclic voltammetry (a) dotted lines five profiles respectively at various typical excitation signal (b) current response times, increasing time shown by arrows] for a and concentration profiles [(c) forward scan cyclic voltammetric experiment.
Since the 1960s , various electrochemical methods such as linear potential sweep voltammetry, cyclic voltammetry etc. and various surface analysis apparatuses such as infrared spectra, X-ray photoelecfron spectroscopy etc. have been developed to investigate the electrochemical reaction mechanism involved in the flotation of sulphide minerals (Fuerstenau et al., 1968 Woods, 1976 Ahmed, 1978 Stm, 1990 Feng, 1989 Buckley, 1995 Arce and Gonzalez, 2002 Bulut and Atak, 2002 Costa et al., 2002). [Pg.2]

Abstract This chapter first explains the natural flotability of some minerals in the aspect of the crystal structure and demonstates the collectorless flotaiton of some minerals and its dependence on the h and pH of pulp. And then the surface oxidation is analysed eletrochemically and the relations of E to the composition of the solutions are calculated in accordance with Nemst Equation. The E h-pH diagrams of several minerals are obtained. Thereafter, electrochemical determination such as linear potential sweep voltammetry (LPSV) and cyclic voltammetry (CV) and surface analysis of surface oxidation applied to the sulphide minerals are introduced. And recent researches have proved that elemental sulfur is the main hydrophobic entity which causes the collectorless flotability and also revealed the relation of the amount of sulfur formed on the mineral surfaces to the recoveries of minerals, which is always that the higher the concentration of surface sulphur, the quicker the collectorless flotation rate and thus the higher the recovery. [Pg.20]


See other pages where Cyclic linear sweep voltammetry is mentioned: [Pg.368]    [Pg.431]    [Pg.358]    [Pg.335]    [Pg.152]    [Pg.218]    [Pg.368]    [Pg.431]    [Pg.358]    [Pg.335]    [Pg.152]    [Pg.218]    [Pg.64]    [Pg.158]    [Pg.6453]    [Pg.598]    [Pg.122]    [Pg.1930]    [Pg.473]    [Pg.28]    [Pg.267]    [Pg.27]    [Pg.385]    [Pg.23]    [Pg.26]    [Pg.58]    [Pg.63]    [Pg.80]    [Pg.61]    [Pg.61]    [Pg.414]    [Pg.343]    [Pg.679]    [Pg.231]   
See also in sourсe #XX -- [ Pg.188 ]




SEARCH



CYCLIC VOLTAMMETRY AND LINEAR SWEEP TECHNIQUES

Cyclic voltammetry

Linear Potential Sweep and Cyclic Voltammetry

Linear Sweep and Cyclic Voltammetry

Linear Sweep/Cyclic

Linear sweep voltammetry

Linear-Cyclic

Sweep

© 2024 chempedia.info