Process simple Leach

Burning herbs to ash is easy enough over a small propane stove, but there are a few problems. First there is the smoke and smell, sure to attract the attention of your neighbors and elicit moans and groans from other people of your household. Unless you have a good fume hood, this is definitely an outdoor activity. Secondly, there are some materials which refuse to get very white at all. There is a simple method we can use, called the leaching process, to obtain the salts in a purified form. 

The zinc pressure leach process depends upon a simple net reaction. 

Incoiporation of metal precursors into carbon aerogel is traced back to incorporation of metal salts into RF solution before the sol-gel process. Simple physical adsorption of metal salts on wet gel matrices caused leaching of the metal ions during washings required by the sol-gel process. This resorted researchers to use derivatives of resorcinol (e.g.,... 

An inorganic membrane can be prepared by various methods such as sol-gel, phase separation and leaching.2,3 The sol-gel process is considered the most practical method among those used to prepare inorganic membrane. Sol-gel processing is a simple technology in principle but requires considerable effort to become of practical use. The advantage of this... 

In the case of molten salts, the functional electrolytes are generally oxides or halides. As examples of the use of oxides, mention may be made of the electrowinning processes for aluminum, tantalum, molybdenum, tungsten, and some of the rare earth metals. The appropriate oxides, dissolved in halide melts, act as the sources of the respective metals intended to be deposited cathodically. Halides are used as functional electrolytes for almost all other metals. In principle, all halides can be used, but in practice only fluorides and chlorides are used. Bromides and iodides are thermally unstable and are relatively expensive. Fluorides are ideally suited because of their stability and low volatility, their drawbacks pertain to the difficulty in obtaining them in forms free from oxygenated ions, and to their poor solubility in water. It is a truism that aqueous solubility makes the post-electrolysis separation of the electrodeposit from the electrolyte easy because the electrolyte can be leached away. The drawback associated with fluorides due to their poor solubility can, to a large extent, be overcome by using double fluorides instead of simple fluorides. Chlorides are widely used in electrodeposition because they are readily available in a pure form and... 

The most economical route Is probably to use screening studies to determine the dominant fate processes and then study only those In detail. In this paper we review some simple screening techniques that can be used to quantify volatilization and leaching rates at the soil/air Interface. Volatilization and leaching rates are then compared with estimates of transformation rates to determine the compound s overall fate and Identify the process requiring further study If a more exact fate assessment Is required. 

---