Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Kolmogorov-Johnson-Mehl-Avrami model

After switching from fast cooling to isothermal conditions at time zero, the measured heat flow rate exponentially approaches a constant value (-10.3 mW) with a time constant of about 3 seconds for this DSC. The observed crystallization peak is often symmetric, and then the time of the peak maximum (nunimum) is a measure of crystallization half time. Integration of the peak yields the enthalpy change, which can be transformed into relative crystallinity by dividing by the limiting value at infinite time. To obtain development of absolute crystallinity (mass fraction) the curve has to be divided by the enthalpy difference between crystal and liquid at the crystallization temperature, which is available from ATHAS-DB [124], The commonly applied Kolmogorov-Johnson-Mehl-Avrami (KJMA) model for the kinetic analysis of isothermal crystallization data is based on volume fractions. Therefore, the mass fraction crystallinity, Wc, as always obtained from DSC, should be transformed into volume crystallinity. [Pg.24]

The rate of transformation of a metastable solid (parent) phase (A) to form a more stable solid (product) phase (B) is usually modeled using the Avrami equation (Avrami, 1939, 1940), which is also known as the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation. This equation is based on a model that assmnes that the transformation involves the nucleation of the product phase followed by its growth imtil the parent phase is replaced by the... [Pg.197]

The common method for modeling both isothermal and non-isothermal crystallization kinetics from amorphous solids is the Johnson-Mehl-Avrami -Kolmogorov... [Pg.430]

It follows that the so-called empirical kinetic model function can be generally described by all-purpose, three-exponent relation, first introduced by (and often named after the authors as) Sestdk and Berggren (SB) equation [480], h(q) = (/ ( - a) [-In (1 - a)f AX is practically applicable as either form, SB equation, oT (1 - a) , and/or modified Johnson, Mehl, Avrami, Yerofeev and Kolmogorov (JMAYK) equation, (1 - a) [-In (1 - a)f (related to its original form, - ln(l - a) = (krtf, through the exponentsp and r,. Q.,p (1 - 1/r ). [Pg.323]

Many mathematical models have bees advanced relating nucleation and nuclei growth rates to the overall kinetics of phase transformation, such as Johnson and Mehl [427], Avrami [428], Yerofyeyev [429], Kolmogorov [430] as well as Jacobs-Tompkins [431] or Mampel [432] and were agreeably suinmarized elsewhere [1,3,413,144, 421,422,423,426,43 I ]. [Pg.284]


See other pages where Kolmogorov-Johnson-Mehl-Avrami model is mentioned: [Pg.68]    [Pg.96]    [Pg.106]    [Pg.124]   
See also in sourсe #XX -- [ Pg.23 ]




SEARCH



Avrami

Avrami model

Johnson

Johnson-Mehl

Johnson-Mehl-Avrami model

Johnson-Mehl-Avrami-Kolmogorov

Kolmogorov

© 2024 chempedia.info