Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Infrared welding mechanical testing

Nondestmctive testing (qv) can iaclude any test that does not damage the plastic piece beyond its iatended use, such as visual and, ia some cases, mechanical tests. However, the term is normally used to describe x-ray, auclear source, ultrasonics, atomic emission, as well as some optical and infrared techniques for polymers. Nondestmctive testing is used to determine cracks, voids, inclusions, delamination, contamination, lack of cure, anisotropy, residual stresses, and defective bonds or welds in materials. [Pg.156]

The mechanical testing conducted on high-quality infrared welds has shown that the welding factors achieved for PVDF when tested at -40°C were greater than 0.9. [Pg.273]

Non-destructive test (1) A test that yields information about failure under mechanical stress without actually stressing to failure. (2) More broadly, any test to evaluate a property of a material, part, or structure that does not significantly damage the part. Techniques used include ultrasound, magnetic inspection of metals and welds. X-ray inspection, infrared, nuclear magnetic resonance, and sonic analysis. Although an indentation-hardness test leaves a permanent mark, in many tests of parts it is nondestructive. [Pg.656]


See also in sourсe #XX -- [ Pg.273 ]




SEARCH



Infrared welding

Infrared welds

Infrared welds mechanical testing

Infrared welds mechanical testing

Mechanical testing

Mechanical tests

Weld testing

Welding testing

© 2024 chempedia.info