Hydroxyls, derivatization

Hydroxyl Group Derivatization. Epichlorohydrin Activation. One-half gram of N-acetylated heparin was dissolved in 10 mL of 1.0M Na2C03 solution. One milliliter of epichlorohydrin and either 1 mL of n-butylamine or 1 g of glycine or 2-aminoethyl hydrogen sulfate were added to the heparin solutions and allowed to react at 40°C for 5 h. Reaction schemes are illustrated in Figure 2. The hydroxyl-derivatized heparins were then dialyzed and freeze-dried. 

Nuclear Magnetic Resonance (NMR) Spectrometry. Spectral verification of derivatization was provided by proton NMR of N-acetylated and carboxylic- and hydroxyl-derivatized heparins using a 300-MHz Varian SC 300 NMR spectrometer. Forty milligrams/milliliter of the respective heparin was dissolved in deuterium oxide with 1% 2,2-dimethyl-2-silapentane-5-sulfonate(DSS) and transferred to 5-mm NMR tubes. Spectra were obtained at room temperature with a spin rate of 20 rps and a gas flow rate of 13 ft3/h. 

Proton NMR (250 MHz) can be used to determine relative content of monoester and diester in acid ethoxylates, since only the monoester contains free hydroxyl. Derivatization is necessary to resolve the hydroxyl signal trichloroacetylisocyanate was used in this case. The spectrum is run twice, with and without derivatization. It was necessary to remove free polyethylene glycol by extraction. Moisture must also be absent, to avoid side reactions with the derivatizing agent (33). 

Gas chromatography (gc) has been used extensively to analyze phenoHc resins for unreacted phenol monomer as weU as certain two- and three-ring constituents in both novolak and resole resins (61). It is also used in monitoring the production processes of the monomers, eg, when phenol is alkylated with isobutylene to produce butylphenol. Usually, the phenoHc hydroxyl must be derivatized before analysis to provide a more volatile compound. The gc analysis of complex systems, such as resoles, provides distinct resolution of over 20 one- and two-ring compounds having various degrees of methylolation. In some cases, hemiformals may be detected if they have been properly capped (53). 

Another successhil strategy for derivatization of erythromycin employed modification of functional groups involved in intramolecular cyclizations. The C-9 ketone, C-6 hydroxyl group, C-8 proton, and/or C-ll,12-diol of erythromycin were converted into functional groups which participate poorly, if at all, in intramolecular cyclizations. Some derivatives which have been extensively evaluated in preclinical and clinical trials exhibit such desirable properties as better stabiUty under acidic conditions, greater oral bioavadabihty, and higher and more prolonged concentrations of antibiotic in semm and tissues. 

These products are characterized in terms of moles of substitution (MS) rather than DS. MS is used because the reaction of an ethylene oxide or propylene oxide molecule with ceUulose leads to the formation of a new hydroxyl group with which another alkylene oxide molecule can react to form an oligomeric side chain. Therefore, theoreticaUy, there is no limit to the moles of substituent that can be added to each D-glucopyranosyl unit. MS denotes the average number of moles of alkylene oxide that has reacted per D-glucopyranosyl unit. Because starch is usuaUy derivatized to a considerably lesser degree than is ceUulose, formation of substituent poly(alkylene oxide) chains does not usuaUy occur when starch is hydroxyalkylated and DS = MS. 

Ph3COSiMc3, Me3SiOTf, CH2CI2, 0°, 0.5 h, 73-97% yield. These conditions will also introduce the trityl group on a carboxyl group. The primary hydroxyl of persilylated ribose was selectively derivatized. 

Synthetic chiral adsorbents are usually prepared by tethering a chiral molecule to a silica surface. The attachment to the silica is through alkylsiloxy bonds. A study which demonstrates the technique reports the resolution of a number of aromatic compoimds on a 1- to 8-g scale. The adsorbent is a silica that has been derivatized with a chiral reagent. Specifically, hydroxyl groups on the silica surface are covalently boimd to a derivative of f -phenylglycine. A medium-pressure chromatography apparatus is used. The racemic mixture is passed through the column, and, when resolution is successful, the separated enantiomers are isolated as completely resolved fiactions. Scheme 2.5 shows some other examples of chiral stationary phases. 

Another way to derivatize the OH group is by silylation using the Tri-sil Z reagent that will silylate the hydroxyl group, but not silylate the secondary amino group. 

The basic requirement for cellulose dissolution is that the solvent is capable of interacting with the hydroxyl groups of the AGU, so as to eliminate, at least partially, the strong inter-molecular hydrogen-bonding between the polymer chains. There are two basic schemes for cellulose dissolution (i) Where it results from physical interactions between cellulose and the solvent (ii) where it is achieved via a chemical reaction, leading to covalent bond formation derivatizing solvents . Both routes are addressed in details below. 

As previously discussed, solvents that dissolve cellulose by derivatization may be employed for further functionahzation, e.g., esterification. Thus, cellulose has been dissolved in paraformaldehyde/DMSO and esterified, e.g., by acetic, butyric, and phthalic anhydride, as well as by unsaturated methacrylic and maleic anhydride, in the presence of pyridine, or an acetate catalyst. DS values from 0.2 to 2.0 were obtained, being higher, 2.5 for cellulose acetate. H and NMR spectroscopy have indicated that the hydroxyl group of the methy-lol chains are preferably esterified with the anhydrides. Treatment of celliflose with this solvent system, at 90 °C, with methylene diacetate or ethylene diacetate, in the presence of potassium acetate, led to cellulose acetate with a DS of 1.5. Interestingly, the reaction with acetyl chloride or activated acid is less convenient DMAc or DMF can be substituted for DMSO [215-219]. In another set of experiments, polymer with high o -celliflose content was esterified with trimethylacetic anhydride, 1,2,4-benzenetricarboylic anhydride, trimellitic anhydride, phthalic anhydride, and a pyridine catalyst. The esters were isolated after 8h of reaction at 80-100°C, or Ih at room temperature (trimellitic anhydride). These are versatile compounds with interesting elastomeric and thermoplastic properties, and can be cast as films and membranes [220]. 

---