Hydrogen sulphide solubility

CfiHsNjOs. Red needles m.p. 168-169°C. Soluble in dilute acids and alkalis. Prepared by reduction of picric acid with sodium hydrogen sulphide, ft is used for the preparation of azodyes, which can be after-chromed by treatment with metallic salts owing to the presence of a hydroxyl group ortho to the amino-group. 

Hydrogen sulphide is slightly soluble in water, giving an approximately 0.1 M solution under 1 atmosphere pressure it can be removed from the solution by boiling. The solution is weakly acidic and dissolves in alkalis to give sulphides and hydrogensulphides. The equilibrium constants... 

These are practically insoluble in water, are not hydrolysed and so may be prepared by addition of a sufficient concentration of sulphide ion to exceed the solubility product of the particular sulphide. Some sulphides, for example those of lead(II), copper(II) and silver(I), have low solubility products and are precipitated by the small concentration of sulphide ions produced by passing hydrogen sulphide through an acid solution of the metal salts others for example those of zincfll), iron(II), nickel(II) and cobalt(II) are only precipitated when sulphide ions are available in reasonable concentrations, as they are when hydrogen sulphide is passed into an alkaline solution. 

For a cobalt(ll) salt, the precipitation of the blue->pitik cobalt(II) hydroxide by alkali, or precipitation of black cobalt(II) sulphide by hydrogen sulphide provide useful tests the hydroxide is soluble in excess alkali and is oxidised by air to the brown CoO(OH) . 

Soluble sulphides. Hydrogen sulphide and soluble sulphides can also be determined by oxidation with potassium iodate in an alkaline medium. Mix 10.0 mL of the sulphide solution containing about 2.5 mg sulphide with 15.0 mL 0.025M potassium iodate (Section 10.126) and 10 mL of 10M sodium hydroxide. Boil gently for 10 minutes, cool, add 5 mL of 5 per cent potassium iodide solution and 20 mL of 4M sulphuric acid. Titrate the liberated iodine, which is equivalent... 

Hydrogen sulphide is a dense, colourless, highly flammable water-soluble gas with... 

The eSect of an excess of hydrogen sulphide has very little influence on the solubility of potassium hydrosulphide because, as V. Rothmund has indicated, this salt is too little ionized for the slightly dissociated hydrosulphuric acid to have an appreciable influence on the solubility. 

---