Hydrodynamic injection techniques, effect

Both injection techniques have been shown to suffer from the effects of analyte diffusion, specially when the clean capillary is initially introduced into the sample solution. Diffusion occurs across the boundary area between analyte and buffer, which is defined by the cross-sectional area of the capillary. Both techniques also suffer from the effects of inadvertent hydrodynamic flow that results from the reservoir liquid levels being at slightly different levels. While these effects are significant for the buffer-filled capillaries used in capillary zone electrophoresis, they are both much less important when the capillary is filled with a gel. 

Urea in kidney dialysate can be determined by immobilizing urease (via silylation or with glutaraldehyde as binder) on commercially available acid-base cellulose pads the process has to be modified slightly in order not to alter the dye contained in the pads [57]. The stopped-flow technique assures the required sensitivity for the enzymatic reaction, which takes 30-60 s. Synchronization of the peristaltic pumps PI and P2 in the valveless impulse-response flow injection manifold depicted in Fig. 5.19.B by means of a timer enables kinetic measurements [62]. Following a comprehensive study of the effect of hydrodynamic and (bio)chemical variables, the sensor was optimized for monitoring urea in real biological samples. A similar system was used for the determination of penicillin by penicillinase-catalysed hydrolysis. The enzyme was immobilized on acid-base cellulose strips via bovine serum albumin similarly as in enzyme electrodes [63], even though the above-described procedure would have been equally effective. 

---