Hydrazone reduction

Hydrazone reduction, 73 572 Hydrazones, 73 576, 580 hydrazone tautomeric form, 9 365-367 Hydride ions, 73 767 Hydride reagents, functional group behavior toward, 73 615-616t... 

HUGHES-INGOLD THEORY EOR SOLVENT EEEECTS ON REACTIVITY HUMMEL-DREYER TECHNIQUE HYALURONATE LYASE HYALURONIDASES HYBRIDIZATION HYDRATION ATMOSPHERE HYDRATION NUMBER Hydrazone reduction,... 

Starting from isolated hydrazones, reduction to the corresponding hydrocarbons by treatment with base in an aprotic solvent takes place at temperatures significantly below the 200 °C of the Huang-Minlon modification of the Wolff-Kishner reduction. However, hydra-zones cannot be prepared in a one-step reaction between a ketone and hydrazine, since usually azines (R1R2C=N=N=CR1R2) are formed instead. However, semicarbazones are hydrazone derivatives that are easily accessible by the reaction of a ketone with semicarbazide (for the mechanism, see Table 9.2). Semicarbazones can be converted into alkanes with KO/Bu in toluene at temperatures as low as 100 °C. This method provides an alternative to the Wolff-Kishner reduction when much lower than usual reduction temperatures are desirable. 

The procedure involves the transformation of carbonyl compounds to the corresponding SAMP or RAMP hydra-zones, metalation, trapping of the intermediate azaenolates with various electrophiles, and either hydrazone cleavage (carbonyl compounds) or hydrazone reduction/N-N bond cleavage (amines). 

Chiral hydrazines, supported on Merri-field resin, were reacted with various aldehydes, affording the corresponding hydrazones. These compounds allowed stereoselective preparation of a-branched amines, through 1,2-addition of both aromatic and aliphatic nucleophiles to the C=N double bond of the hydrazones. Reductive cleavage released the desired amine from the resin. Moderate to good enantiomeric excesses (50-86%) were achieved. 

There is very little known about the structure of the Lycopodium alkaloids. Where the determinations have been made, the nitrogen atoms have always proved to be tertiary without A -methyl, and methoxyl groups are absent. The oxygen in lycopodine is ketonic (19) as indicated by its infrared spectrum, the formation of a hydrazone, reduction to a carbinol, and reaction with phenyllithium to yield a tertiary alcohol although phenyl magnesium bromide does not react with it (20). Dihydrolycopodine (9) yields an 0-acetyl derivative melting at 96° and this and its perchlorate proved to be identical with alkaloid L2 and its perchlorate, respectively. When heated with selenium at about 310°, lycopodine generates 7-methyl-... 

A very useful variant of the hydrazone reduction is the deoxygenation of aldehydes and ketones via the hydride reduction of tosylhydrazones (Caglioti reaction) The method is mild, convenient and widely applicable. While sodium borohydride was used in the earlier procedures, considerable improvements have been achieved through the uses of sodium cyanoborohydride, catecholborane, diborane, his-benzoyloxy borane and copper borohydride as reducing agents and HMPA, DMF, sulpholane, etc. as solvents. Use of the sterically crowded 2,4,6-triisopropyl tosylhydrazone derivative has greatly facilitated the reduction in some cases (equations 61-64). ... 

Aldehydes and ketones may be converted into the corresponding primary amines by reduction of their oximes or hydrazones (p. 93). A method of more limited application, known as the Leuckart Reaction, consists of heating the carbonyl compound with ammonium formate, whereby the formyLamino derivative is formed, and can be readily hydrolysed by acids to the amine. Thus acetophenone gives the i-phenylethylformamide, which without isolation can be hydrolysed to i-phenylethylamine. 

The imides, primaiy and secondary nitro compounds, oximes and sulphon amides of Solubility Group III are weakly acidic nitrogen compounds they cannot be titrated satisfactorily with a standard alkaU nor do they exhibit the reactions characteristic of phenols. The neutral nitrogen compounds of Solubility Group VII include tertiary nitro compounds amides (simple and substituted) derivatives of aldehydes and ketones (hydrazones, semlcarb-azones, ete.) nitriles nitroso, azo, hydrazo and other Intermediate reduction products of aromatic nitro compounds. All the above nitrogen compounds, and also the sulphonamides of Solubility Group VII, respond, with few exceptions, to the same classification reactions (reduction and hydrolysis) and hence will be considered together. 

Carbonyl deductions. The classical Wolff-Kishner reduction of ketones (qv) and aldehydes (qv) involves the intermediate formation of a hydrazone, which is then decomposed at high temperatures under basic conditions to give the methylene group, although sometimes alcohols may form (40). 

Production is by the acetylation of 4-aminophenol. This can be achieved with acetic acid and acetic anhydride at 80°C (191), with acetic acid anhydride in pyridine at 100°C (192), with acetyl chloride and pyridine in toluene at 60°C (193), or by the action of ketene in alcohoHc suspension. 4-Hydroxyacetanihde also may be synthesized directiy from 4-nitrophenol The available reduction—acetylation systems include tin with acetic acid, hydrogenation over Pd—C in acetic anhydride, and hydrogenation over platinum in acetic acid (194,195). Other routes include rearrangement of 4-hydroxyacetophenone hydrazone with sodium nitrite in sulfuric acid and the electrolytic hydroxylation of acetanilide [103-84-4] (196). 

The most important synthesis of pyrazolones involves the condensation of a hydrazine with a P-ketoester such as ethyl acetoacetate. Commercially important pyrazolones carry an aryl substituent at the 1-position, mainly because the hydrazine precursors are prepared from readily available and comparatively inexpensive diazonium salts by reduction. In the first step of the synthesis the hydrazine is condensed with the P-ketoester to give a hydrazone heating with sodium carbonate then effects cyclization to the pyrazolone. In practice the condensation and cyclization reactions are usually done in one pot without isolating the hydrazone intermediate. 

Alloxan forms an oxime (1007) which is the same compound, violuric acid, as that formed by nitrosation of barbituric acid likewise, a hydrazone and semicarbazone. Reduction of alloxan gives first alloxantin, usually formulated as (1008), and then dialuric acid (1004 R = OH) the steps are reversible on oxidation. Vigorous oxidation with nitric acid and alkaline hydrolysis both give imidazole derivatives (parabanic acid and alloxanic acid, respectively) and thence aliphatic products. Alloxan and o-phenylenediamine give the benzopteridine, alloxazine (1009) (61MI21300). 

The product composition from these reactions is influenced by the location of the functional group in the substrate. Olefin formation is the most common side reaction and in certain cases, especially with reductions of tosyl-hydrazones (section IV-B), it may become dominant so that the reaction can be used for the preparation of mono-labeled olefins. 

Thus, the reduction of tosylhydrazones with sodium borodeuteride in dioxane provides only monodeuterated analogs. For the insertion of two deuteriums it is necessary to first exchange the hydrazone proton and to carry out the reduction in aprotic or deuterated solvents. Under these conditions the reduction of the tosylhydrazone derivatives of 7- and 20-keto... 

Some advantages of this reaction are high yield if the tosylate is in a sterically accessible position excellent isotopic purity of the product (usually higher than-95%) and perhaps most important, access to stereospecifically labeled methylene derivatives. For example, deuteride displacement of 3j -tosylates (183) yields the corresponding Sa-d derivative (185) in 96-98% isotopic purity. Application of this method to the labeled sulfonate (184), obtained. by lithium aluminum deuteride reduction of a 3-ketone precursor (see section HI-A) followed by tosylation, provides an excellent synthesis of 3,3-d2 labeled steroids (186) without isotopic scrambling at the adjacent positions. The only other method which provides products of comparable isotopic purity at this position is the reduction of the tosyl-hydrazone derivative of 3-keto steroids (section IV-B). 

It is important to exclude air in all hydrazone-type reductions involving olefins (otherwise, over-reduction occurs due to diimide formation) in the above example, as an added precaution cyclohexene was used as a solvent. 

In certain cases this reduction (with lithium aluminum hydride) takes a different course, and olefins are formed. The effect is dependent on both the reagent concentration and the steric environment of the hydrazone. Dilute reagent and hindered hydrazone favor olefins borohydride gives the saturated hydrocarbon. The hydrogen picked up in olefin formation comes from solvent, and in full reduction one comes from hydride and the other from solvent. This was shown by deuteriation experiments with the hydrazone (150) ... 

---