Honeycomb-shaped woven net

Keywords Differential movement, fall-off of exterior ceramic tile, honeycomb shaped woven net, polymer modified lightweight cement mortar, two dimensional finite element method, woven fiber net... [Pg.62]

Polymer modified cement mortar 4 Honeycomb shaped woven net 5 Bonding mortar 6 Joint-filling mortar 7 Ceramic tile... [Pg.69]

Fig. 8 Ceramic tile installation by PLCM connecting with honeycomb shaped woven net.

Sandwiching of fiber material at the interface between concrete substrate and mortar layer as a substrate of ceramic tile finish was developed and its use is recommended in order to prevent the fall-off of exterior ceramic tile installation from reinforced concrete wall. This material is honeycomb shaped woven net as shown in Fig. 9. [Pg.69]

Continuous woven fiber net of x and y axes as shown in Fig. 9, is effective to reinforce and link the exterior ceramic tile installation in the in-plane direction. Chopped fiber fixed to continuous woven fiber net at the Z direction, anchors the exterior ceramic wall tile installation. If delamination and cracking are partially generated in the exterior ceramic tile installation, honeycomb shaped woven net can prevent the fall-off of tile. Fig. 8 shows typical example of section of exterior ceramic tile installation using PLCM and honeycomb shaped woven net. [Pg.69]

Adoption of honeycomb shaped woven net is surely effective to prevent the fall-off of the exterior ceramic tile installation using PLCM as a substrate mortar. [Pg.70]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...