HOBOKEN,POLYMER PROCESSING INSTITUTE

Dey S K Natarajan P Xanthos M Braathen M D Hoboken,Polymer Processing Institute Boreahs SA... 

R. Potluri, D. B. Todd, and C. G. Gogos, Proc. 1 l,h Polymer Mixing Study Semi-annual Meeting, Polymer Processing Institute, Hoboken, NJ (1995). 

This industrially cosponsored program was carried out through the 1990s at the Polymer Processing Institute at New Jersey Institute of Technology, Hoboken, NJ, and directed by one of the authors. 

Fig. 11.31 Schematic representation of the Twin Screw Mixing Element Evaluator (TSMEE) in (a) the melt-melt (M-M) mode, and (b) the dissipative mix-melting (DMM) mode. The last section of both the M-M and DME modes consists of two separate HBRs. The mixing element sequences are a design variable. [Reprinted with permission from Proceedings of the Sixth Semi-annual Meeting of the Polymer Mixing Study, Polymer Processing Institute, Hoboken, NJ (1993).]...

G. Kim and M. Libera Microstmctural Analysis of Compatibilizer Distribution in LDPE/PS Blends with SIS, Proceed. Eleventh Semi-annual Polymer Mixing Study, Polymer Processing Institute, Hoboken, NJ, 1996. 

Polymer Processing Institute at Stevens Institute of Technology, Castle Point on Hudson, Hoboken, New Jersey 07030, USA Department of Chemical Engineering, Chemistry and Environmental Science, New Jersey Institute of Technology, University Heights, Newark, New Jersey... 

Polymer Processing Institute, Castle Point, Hoboken, NJ 07030, USA... 

Polymer Processing Institute at Stevens Institute of Technology, Hoboken, U.S.A. 

Pearce, M.B., How to use anaerobics successfully. Applied Polymer Symposium No. 19, Processing for Adhesive Bonded Structures, Presented at Symposium held at Stevens Institute of Technology, Hoboken, NJ, and sponsored by Picatinny Arsenal and Stevens Institute of Technology, August 23-25, 1972 (MJ. Bodnar, ed.), pp. 207-230, Wiley-Interscience, 1966. 

---