High speed rotor

A variety of conical refiners were developed that involved modifications of the Jordan refiner. The Hydrafiner, for example, has a short, low taper, high speed rotor, and wide bars (10). The stock is driven through the refiner by an impeller which is fitted to the smaU inlet end of the rotor shaft. The Claflin refiner has a very short, high taper plug. Vanes that fit on the wide end of the plug draw the stock through the unit (11). 

Boyce, M.P., White, G., and Morgan, E., Dynamic Simulation of a High Speed Rotor, International Conference on Centrifugal Compressors at Madras, India, February 1978. 

Lindsey, J.R., Significant Developments in Methods for Balancing High-Speed Rotors, ASME Paper No. 69-Vibr-53. 

Generation is generally by high-speed rotors, with metered air and liquid flows and monitoring to control the density of the foam. 

Stirring the mixture with a high speed chopper or saw-tooth dispersator Passing the mixture through the gap between a high-speed rotor and a stationary stator... 

Use Balance weights for aircraft, high-speed rotors in gyro-compasses, y-radiation shielding, radio-isotope transportation casks and fuel element transfer casks, in general as structural material applicable to radiation shielding. 

Furchner B., Mersmann A., Foam breaking by High Speed Rotors,... 

High speed rotor CuUing/grinding Continuous No hard materials Stainless steel mat... 

I. Roberts, "High-speed rotors for nuclear magnetic resonance studies on solids," J. Magn. Resonance 1, 27-34 (1969). 

This type of equipment is similar to the in-line dynamic mixer but in this case it is used in a vessel. The mixing head consists of a high-speed rotor inside a... 

Actually head of the Process Technology Department. Publications High-speed rotor-stator dispersion machines... 

Colloid milling is instead based on a high speed rotor/stator system, in which the processed material is grinded, dispersed, or emulsified as a consequence of its exposure to intense shear stresses, friction, and high frequency vibrations. Colloid mills are constituted by smooth or toothed rotors and stators, gear-rim dispersion machines, and intensive mixers. ... 

Turbomolecular pumps are based on the blades of the high speed rotors (50,000 - 90,000 rpm) providing directional acceleration to the gas molecules, moving them away from the chamber that is being evacuated. 

---