High Speed Floor Coating

This is a floor polish concentrate and must be diluted with water before use. A simple 1 1 volume dilution with water will produce a 17.9% solids floor polish. Use with low speed spray buffing and high speed maintenance programs. Can be burnished daily or on an intermittent schedule. With these maintenance procedures a consistent high level of appearance can be sustained over an extended period of time. Up to three coats per application are suggested with 30-45 min. drying time depending on solids and conditions. 

Mor-Flo 430-M1 is a restorer concentrate formulation which can be easily diluted with water to form a "ready-to-use" solution. Recommended for mop-on applications where high and ultra-speed maintenance procedures are used. Since the restorer is a film former, floors should be clean and free of embedded soil prior to application. Application of the restorer fills small scratches and enhances gloss. The coating may be burnished after drying. 

---