High resolution separation column Polyethylene

Figures 6, 7 and 9 show calibration curves using two multi-column combinations and illustrate the degree of "optimization obtained in this system. The mobile phases for Figures 6 and 7 contained 0.025 g polyethylene oxide and ion exclusion and adsorption effects should therefore be largely eliminated. Figure 6 shows that reasonably good resolution can be obtained with a combination of five columns but does exhibit some loss of peak separation at the low cuid high MW ends. In Figure 7 the effect of adding a sixth column of small pore size is illustrated and it is seen that resolution at the low MW end is thereby somewhat improved. This calibration curve is effectively linear with a change of slope at 500,000 MW. It should provide a useful aqueous GPC system for MW and MWD determination of nonionic polyacrylamides.

---