High-impact polystyrene-syndiotactic

Polystyrene (PS) in its atactic and syndiotactic forms is a brittle thermoplastic, even in an orientated state [4]. To improve the toughness of aPS, impact modification has been practised for a long time, either by polymerizing the styrene in the presence of a polybutadiene rubber leading to high-impact polystyrene, commonly called HIPS, or by blending the polystyrene with multi-block copolymers, mainly of the styrene-butadiene-styrene (S-B-S) type. 

Nanocomposites of syndiotactic polystyrene (sPS) employing MMT-hexadecyltributylphosphonium [40, 41] and high-impact polystyrene (H1PS)/MMT-hexadecyltriphenylphosphonium [42] were prepared by melt-blending and in situ coordination-insertion polymerization. Partially exfoliated or intercalated materials were obtained in all cases, and a decrease of crystallinity of sPS was observed. However, the presence of clay did not have a strong influence on the sPS thermal transitions. Thermal decomposition of the material was slowed and mechanieal properties were improved in the presence of low organoclay content. Intercalated HIPS nanocomposites were obtained, with improved thermal and flame retardant properties compared to pure HIPS (Figure 3.8). 

High performance polymers, such as poly(ether-ether ketone), PEEK, as well as new resins, still coming on stream, such as polyfethylene naphthalate), syndiotactic polystyrene, and cyclo-olefinic copolymers, are offering further challenges to impact modification. 

---