Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Henschel mixer

FIG. 18-44 High-intensity mixer (a) bottom scraper (h) fluidizing tool (c) horn tool (d) flush-mounted discharge valve. Henschel Mixers America, Inc.)... [Pg.1646]

The masterbatches were prepared by mixing in a Henschel mixer. Typically, the ingredients were mixed four to six minutes at 2600 rpm, and a final mixing temperature of 150°-60° C was reached. b Dibutyltin thioglycollate... [Pg.139]

Fig. 7.43 Schematic representation of the vortex flow pattern in a Henschel high intensity mixer (courtesy HENSCHEL Mixers America, Houston, TX). Fig. 7.43 Schematic representation of the vortex flow pattern in a Henschel high intensity mixer (courtesy HENSCHEL Mixers America, Houston, TX).
One of the first of these types of machines, the Henschel mixer, was introduced around 1955. It provides a (mechanically) fluidized vortex pattern of movement (Fig. [Pg.180]

Thyssen Henschel Industrietechnik GmbH Henschel-Mixers Systems Henschelplatz 1 D-34112 Kassel, Germany... [Pg.1105]

Henschel mixer is most frequently used for dryblending. " In such a mixer, the technological process includes addition steps and temperatures which must be reached in order to proceed to the next step. Order of addition is considered important. The following order of addition is usually suggested resin, stabilizer, plasticizer, filler, lubricant. Stabilizer is added to the resin before it is subjected to heat, and lubricant is added at the end because it may interfere with plasticizer absorption. - Temperatures which determine the end of the mixing step depend on the amount of plasticizer in a mixture (the higher the amount of plasticizer, the higher the temperature). Final temperature of dryblend is between 90 and 110°C. Premixed dry blend is then cooled to below 50°C. ... [Pg.484]

The formulation is given in Table 10.1. The raw elastomer was an NBR copolymer powdered rubber with a Mooney index of 80 (ASTM D1646 [7]). The powder was preblended with a high-intensity Henschel mixer. [Pg.274]

A mixture of soy protein isolate (raw polymer) (100 parts) and nanoelay (Cloisite 3 OB) (10 parts) was mixed in a high-speed mixer (Henschel Mixers American, Inc., Houston, TX) to uniformly distribute the ingredients. To prevent elumping of the mixtme, a solution of water (80... [Pg.305]


See other pages where Henschel mixer is mentioned: [Pg.644]    [Pg.56]    [Pg.97]    [Pg.605]    [Pg.547]    [Pg.1105]    [Pg.1389]    [Pg.411]    [Pg.428]    [Pg.1780]    [Pg.940]    [Pg.963]    [Pg.264]    [Pg.43]    [Pg.306]    [Pg.396]   
See also in sourсe #XX -- [ Pg.44 , Pg.45 ]

See also in sourсe #XX -- [ Pg.484 ]

See also in sourсe #XX -- [ Pg.387 ]




SEARCH



Compounding Using a Henschel Type Mixer

Henschel type mixer

© 2024 chempedia.info