Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Haldor Tops

The authors wish to thank Dr. J. Rostrup-Nielsen (Haldor Tops e A.S.) for his continuous interest in this work. They are also indebted to Elsevier Scientific Publishing Co. for having granted the permission to publish original data. [Pg.247]

Haldor Tops e have described a number of sulphur resistant catalyst formulations.131 132 For example, metals of Groups VB or VIB with Fe, Co, or Ni on a porous ceramic (A1203 or Ti02) as support can give gases containing large amounts of hydrocarbons in addition to methane in the... [Pg.34]

Kim Aasberg-Petersen / Haldor Tops e A/S, Lyngby, Denmark... [Pg.3301]

Figure 8.22. Schematic drawing of an adiabatic two-bed radial flow reactor. There are three inlets and one outlet. The major inlet comes in from the top (left) and follows the high-pressure shell (which it cools) to the bottom, where it is heated by the gas leaving the reactor bottom (left). Additional gas is added at this point (bottom right) and it then flows along the center, where even more gas is added. The gas is then let into the first bed (A) where it flows radially inward and reacts adiabatically whereby it is heated and approaches equilibrium (B). It is then cooled in the upper heat exchanger and move on to the second bed (C) where it again reacts adiabatically, leading to a temperature rise, and makes a new approach to equilibrium (D). (Courtesy of Haldor Topspe AS.)... Figure 8.22. Schematic drawing of an adiabatic two-bed radial flow reactor. There are three inlets and one outlet. The major inlet comes in from the top (left) and follows the high-pressure shell (which it cools) to the bottom, where it is heated by the gas leaving the reactor bottom (left). Additional gas is added at this point (bottom right) and it then flows along the center, where even more gas is added. The gas is then let into the first bed (A) where it flows radially inward and reacts adiabatically whereby it is heated and approaches equilibrium (B). It is then cooled in the upper heat exchanger and move on to the second bed (C) where it again reacts adiabatically, leading to a temperature rise, and makes a new approach to equilibrium (D). (Courtesy of Haldor Topspe AS.)...
Topsoe Fuel CeU is a subsidiary of the Haldor Topspe Group. Topsoe Fuel CeU was estabUshed as a separate company in 2004, based on more than a decade of fuel ceU research activities in Haldor Topspe. Haldor Topspe is an internationally recognized company within the catalysis industry with worldwide presence and a turnover exceeding 500 mUUon . Haldor Topspe holds a top three position in aU of its business... [Pg.712]

Notes I. Temperatures are bed inlet temperatures. 2. Catalyst is Tops e CK-302 metal oxide. Source Haldor Tops0e A/S 1991 A, 1993) ... [Pg.1150]


See other pages where Haldor Tops is mentioned: [Pg.9]    [Pg.1068]    [Pg.285]    [Pg.1175]    [Pg.9]    [Pg.1068]    [Pg.285]    [Pg.1175]    [Pg.326]    [Pg.39]    [Pg.230]    [Pg.257]   
See also in sourсe #XX -- [ Pg.74 , Pg.90 , Pg.106 , Pg.120 , Pg.165 , Pg.178 , Pg.189 ]




SEARCH



© 2024 chempedia.info