Gravity settlers settling tank

Gravity Settlers Gravity can act to remove larger droplets. Set-thng or disengaging space above aerated or boiling liquids in a tank or spray zone in a tower can be very useful. If gas velocity is kept low, all particles with terminal settling velocities (see Sec. 6) above the gas... 

Gravity Settlers Decanters These are tanks in which a liqmd-liquid dispersion is continuously settled and coalesced and from wriich the settled liquids are continuously withdrawn. They can be either horizontal or vertical. Figure 15-24 shows some typical horizontal decanters. For an uninstrumented decanter the height of the heavy-phase-liquid leg above the interface is balanced against the height of the hght-hquid phase above the interface, Eq. 15-50. 

For very small particles or low density solids, the terminal velocity may be too low to enable separation by gravity settling in a reasonably sized tank. However, the separation can possibly be carried out in a centrifuge, which operates on the same principle as the gravity settler but employs the (radial) acceleration in a rotating system (o r) in place of the vertical gravitational... 

J. Simple gravity settling tank. In Fig. 14.3-5a a simple gravity settler is shown for removing by settling a dispersed liquid phase from another phase. The velocity horizontally to the right must be slow enough to allow time for the smallest droplets to rise from the bottom to the interface or from the top down to the interface and coalesce. 

A refinement of the gravity settler in Fig.1 is to place a baffle at the input end and inclined plates in the tank. This increases separation efficiency at the solid particles start from a better setting position and have a shorter distance to travel before reaching their point of settling. 

---