Gradient separations separation factor

MW separation factor Pore size Column i.d. Interstitial void size Thermal gradient... 

The column length and inner diameter are the two most important features required in column generation on microchips. The column separation capacity is measured in terms of number of plates, which is proportional to column length. But back pressure and analysis time are raised proportionally as column length increases. For gradient separations, column length is less a factor for resolution as separation is controlled by gradient rather than... 

The Clusius-Dickel column is shown schematically in Figure 2. A wire is mounted at the axis of a cylinder. The wire is heated electrically and the outer wall is cooled. This sets up a radial thermal gradient which leads to a thermal diffusion separation in the x direction. As a result of the radial temperature gradient, a convection current is established in the gas, which causes the gas adjacent to the hot wire to move up the tube with respect to the gas near the cold wall. The countercurrent flow leads to a multiplication of the elementary separation factor. For gas consisting of elastic spheres, the light molecules will then concentrate at the top of the column, while the heavy molecules concentrate at the bottom. The transport theory of the column has been developed in detail (3, iS, 18) and will not be presented here. In a later section we shall discuss the general aspects of the multiplication of elementary separation processes by countercurrent flow. 

However, in the steady state the gradient of the separation factor... 

---