Fused salts corrosion data

The subject is also closely related to fuel-ash corrosion which in most cases is caused by a layer of fused salts such as sulphates and chlorides Attention has been focused on the electrochemistry of this type of corrosion and the relevant thermodynamic data summarised in the form of diagrams . Fluxing and descaling reactions also resemble in some respects reactions occurring during the corrosion of metals in fused salts. A review of some of the more basic concepts underlying corrosion by fused salts (such as acid-base concepts and corrosion diagrams) has appeared. ... 

It is not worth while, therefore, to give a digest of experimentally determined corrosion rates , but Table 2.21 indicates some sources of such data and their nature. (Some references to data on compatibility of fused salts with non-metallic materials have been included for the sake of completeness.) It should be remembered, that in the case of alloys, failure usually arises from selective attack which causes porosity of the container, even though the wall may appear on casual inspection to be quite sound... 

Table 2.21 Corrosion data in fused salts (see also Reference 37)...

The thermodynamics of corrosive alkali salt-oxide interaction is not well established. In an assessment of research needs for materials in coal conversion, the need for carbonate-silicate melt studies, including activity and phase equilibrium measurements, was stressed (31 ). The lack of thermodynamic data for fused salts, and their reactions with oxides and alloys leading to models of hot corrosion, was also indicated. 

---