Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Forming , solid-phase stamping

However, they can also be transfer or compression molded, solid state formed or thermoformed. PC is the matrix phase in most of these blends. The impact modifier can be PE, ABS or acrylic copolymer, e.g., MBS. The blends show good processability, heat resistance, ductility, HDT, high modulus, impact, tensile and flexural strength over a wide temperature range, good adhesion, solvent, chemical, and UV resistance. They can be painted, hot stamped, metallized and plated. Some blends (containing PB as impact modifier) may have poor weatherability. The blends are mainly used in the automotive industry. [Pg.678]

See other pages where Forming , solid-phase stamping is mentioned: [Pg.265]    [Pg.546]    [Pg.321]    [Pg.330]    [Pg.491]    [Pg.291]    [Pg.292]    [Pg.471]    [Pg.510]    [Pg.370]    [Pg.219]    [Pg.370]    [Pg.203]    [Pg.221]    [Pg.290]    [Pg.668]    [Pg.15]    [Pg.275]    [Pg.280]    [Pg.2183]    [Pg.411]   
See also in sourсe #XX -- [ Pg.4 , Pg.5 , Pg.6 , Pg.7 , Pg.8 , Pg.9 , Pg.10 , Pg.11 , Pg.12 , Pg.13 , Pg.14 , Pg.15 , Pg.16 , Pg.17 , Pg.18 , Pg.19 , Pg.20 , Pg.21 ]



SEARCH



Forming solid phase

Solid forms

Stamping

Stampings

Stamps

© 2024 chempedia.info