Flux braking

Here, in addition to the usual notations, D for the detonation velocity, u for the velocity of the material (both are measured with respect to the unreacted, unperturbed fresh mixture), p for the pressure, v for the specific volume (in cm3/g), and I for the enthalpy of a unit mass, we have also introduced the following quantities M for the mass flux per unit area of a surface moving at the detonation velocity6 (in g/cm3 sec this quantity is equal to the mass velocity of combustion), F for the braking force per unit... 

Perbunan. [Ba rer Miles] NBRorNBR/ PVC fluxed blends used in tedL moldings, seals, sleeves, diaphragms, bellows, valves, vibration dampers, footwear soles roll covers, printing blankets, belting, fabric prongs, hoses, cable jackets, brake linings, sponge rubber, adhesives, profiles. 

Road vehicles—Brake linings—Seizure to ferrous mating surface due to corrosion—Test procedure Soft soldering fluxes—Test methods—Part 12 Steel tube corrosion test Soft soldering fluxes—Test methods—Part 15 Copper corrosion test... 

The design of the Buccaneer was such that the tail brakes opened into the jet stream. This meant that they not only were exposed to high temperatures but also suffered from sonic fatigue in the e-flux. The problem was solved by bonding the components with Hidux 1197A and C. 

---