Fluorescent OLED device dopant

The merit of these chromene dopants is their relatively long emission wavelength peaks compared to DCM or DCJTB materials due to the more conjugated chromene moiety, and this contributes to the more saturated red emission. In fact the EL spectra of OLED devices of ITO/TPD/Alq3 chromene-dopants/Alq3/Mg Ag exhibited satisfactory red emission color, especially for Chromene-1 and Chromene-2 dopants. However, these chromene-based red emitters showed lower fluorescent quantum yield (18%, 15%, and 54% for Chro-... 

One of the most common uses for peri-substituted pentacene is as a red emitter in organic light-emitting diodes (OLEDs). Diphenylpentacene, for example, has a fluorescence quantum yield of 30% as a 0.55% dopant in Alq3, yielding OLED devices with efficiencies near the theoretical maximum [34]. Variation of the aryl substituents improves solubility and processing and can increase fluorescence quantum yield (for example, pentacene 25 has a composite fluorescence quantum yield of 32%) [35]. There is one report of the use of diaryl pentacenes in FET devices, but the performance was generally poor (hole mobility for vapor-deposited 23 was of the order of 10-8 cm2 V-1 s-1) [30]. 

Spectra of blue yellow (B Y) harvesting hybrid and blue fluorescent OLEDs. Blue device has the same structiue as B Y except that the yeUow phosphorescent emitter is omitted. Data are taken at ImA/cm. Inset Structure of the yeUow phosphorescent dopant. 

Another important early advance made by Tang et al. [7] is the use of fluorescent doping, i.e., the addition of a small percentage of an emissive fluorescent material into a host matrix. This can be used to alter the color of emission, in addition to improving the efficiency and the lifetime of devices. The technique of simultaneously vapor depositing the host and the fluorescent dopant material is now widely used in the field of OLEDs. 

Enhancement in the performance of OLEDs can be achieved by balanced charge injection and charge transport. The charge transport is related to the drift mobility of charge carriers. Liu et al. [166] reported blue emission from OLED based on mixed host structure. A mixed host structure consists of two different hosts NPB and 9,10-bis(2 -naphthyl)anthracene (BNA) and one dopant 4,4 -bis(2,2-diphenylvinyl)-l,l -biphenyl (ethylhexyloxy)-l,4-phenylene vinylene (DPVBi) material. They reported significant improvement in device lifetime compared to single host OLEDs. The improvement in the lifetime was attributed to the elimination of heterojunction interface and prevention to formation of fluorescence quenchers. Luminance of 80,370 cd/m2 at 10 V and luminous efficiency of 1.8 cd/A were reported. 

---