Fired heaters point, examples

The bottoms of the CD, also known as atmospheric residue, are charged to a second fired heater where the typical outlet temperature is about 750-775°F. From the second heater, the atmospheric residue is sent to a vacuum tower. Steam ejectors are used to create the vacuum so that the absolute pressure can be as low as 30-40 mm Hg (about 7.0 psia). The vacuum permits hydrocarbons to be vaporized at temperatures below their normal boiling point. Thus, the fractions with normal boiling points above 650°F can be separated by vacuum distillation without causing thermal cracking. In this example (Fig. 18.14), the distillate is condensed into two sections and withdrawn as two sidestreams. The two side-streams are combined to form cracking feedstocks vacuum gas oil (VGO) and asphalt base stock. 

This example is provided for illustrative purposes only. It uses a fired heater low-pass flow SIF to illustrate various technical points. The design is not intended for use in any real application. The reader should review relevant application specific standards and technical reports to ensure that the process hazards are identified and that the design is complete. 

---