Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Fast cooling rates

The heater power was decreased at a constant rate until 400 min and then kept constant until 460 min. Then a fast cooling rate was imposed during the cooling process after the completion of solidification. Solidification was started after 108 min from the initial stage of the process, which corresponds... [Pg.58]

Fast cooling rate Flexible sample mounting... [Pg.254]

Submicroscopic crystals in matrix rectilinear alite, sometimes with thin layer of belite spherical matrix belite Fast cooling rate (Fundal, 1980)... [Pg.102]

Another factor that affects the coefficient of reflection is the cooling rate of the cUnker, which influences the composition of the formed glass phase. It has been reported that the highest whiteness is obtained if the composition of the glass phase is close to eutectic (Gaidzhurov and Zhubar, 1994). To achieve this, a fast cooling rate of the clinker is necessary. [Pg.18]

Figure III 37. Cloud point curves as a function of the polymer concentration mca.< urcd at slow and fast cooling rates 3S. ... Figure III 37. Cloud point curves as a function of the polymer concentration mca.< urcd at slow and fast cooling rates 3S. ...
See other pages where Fast cooling rates is mentioned: [Pg.330]    [Pg.287]    [Pg.263]    [Pg.66]    [Pg.687]    [Pg.25]    [Pg.165]    [Pg.298]    [Pg.86]    [Pg.48]    [Pg.381]    [Pg.209]    [Pg.2869]    [Pg.190]    [Pg.417]    [Pg.418]    [Pg.396]    [Pg.672]    [Pg.198]    [Pg.287]    [Pg.241]    [Pg.687]    [Pg.132]    [Pg.262]    [Pg.328]    [Pg.104]    [Pg.114]    [Pg.583]    [Pg.43]    [Pg.170]    [Pg.192]    [Pg.294]    [Pg.90]    [Pg.9]    [Pg.102]    [Pg.581]    [Pg.124]    [Pg.228]    [Pg.15]    [Pg.250]    [Pg.90]    [Pg.30]    [Pg.333]    [Pg.335]    [Pg.102]    [Pg.138]   


SEARCH



Cooling fastness

Cooling rates

© 2024 chempedia.info