Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Epoxy-Polycarbonate Adhesive Joints

Epoxy/polycarbonate double cantilever beam adhesive joint system. [Pg.553]

Although the work of adhesion for an epoxy/polycarbonate joint Immersed in water is 29 mj m , the fracture surface energy for such... [Pg.555]

Soesatyo B, Blicblau AS, Siores E. Effects of microwave curing carbon doped epoxy adhesive-polycarbonate joints, nternational Journal of Adhesion and Adhesives. 2000 20(6) 489-95. [Pg.251]

Soesatyo, B., et al., Effect of Microwave Curing Carbon Doped Epoxy Adhesive-Polycarbonate Joints, International Journal of Adhesion and Adhesives, vol. 20, no. 6, 2000, pp. 489—495. [Pg.288]

An experimental arrangement, very similar to that developed by Wang, Kwei and Zupkol4 was used for the formation of an adhesive bond between plates of polycarbonate and epoxy resin. The mould is shown in Figure 1. In order to form the joint, the polycarbonate sheet is clamped at the bottom of the mould and the liquid adhesive poured into the mould and allowed to cure. Before bond formation, the polycarbonate surface was treated in exactly the same way as for the previous experiments. [Pg.551]

See other pages where Epoxy-Polycarbonate Adhesive Joints is mentioned: [Pg.253]    [Pg.164]    [Pg.545]    [Pg.545]    [Pg.548]    [Pg.550]    [Pg.556]    [Pg.413]    [Pg.413]    [Pg.362]   


SEARCH



Adhesion epoxies

Adhesion joints

Epoxy adhesives

Epoxy adhesives Adhesive joints

© 2024 chempedia.info