Energy Research Center, Grand

Harold H. Schobert University of North Dakota Energy Research Center Grand Forks, ND 58202... [Pg.2]

Grand Forks Energy Research Center, Grand Forks, ND 58201... [Pg.54]

Thermal Reycling of Plastics, Final Report to the American Plastics Council, Energy Environmental Research Center, Grand Eorks, N.D., March 1994. [Pg.234]

W. R. KUBE, HAROLD H. SCHOBERT, S. A. BENSON, and F. R. KARNER Energy Research Center, University of North Dakota, Grand Forks, ND 58202... [Pg.39]

The author wishes to thank the various organizations listed in Table I who supplied samples studied in this work. The author also wishes to thank D. J. Miller and D. H. Neal of the Grand Forks Energy Research Center who performed much of the experimental work. [Pg.64]

According to the vendor, this technology was developed by the Energy and Environmental Research Center (EERC) at the University of North Dakota in Grand Forks, North Dakota, in cooperation with the U.S. Environmental Protection Agency (ERA). [Pg.562]

Hence, cold gas efficiencies of 80-85% should be reached [120,121]. The upper water-cooled wall is made of a special ceramic-matrbc-composite material and is followed by a full water quench to 370 °C at the bottom. A test plant is in operation at the Gas Technology Institute in Des Plaines, Illinois, since 2011 and a 300 t/d dry solids extrusion pump is tested since 2012 at the Energy and Environmental Research Center in Grand Forks, North Dakota [122,123]. [Pg.225]

Big Chemical Encyclopedia