Electrospun polymer fibers polyaniline

H. Dong, V. Nyame, A. G. MacDiarmid, and W. E. Jones Jr., Polyaniline/poly(methyl methacrylate) coaxial fibers the fabrication and effects of the solution properties on the morphology of electrospun core fibers, J. Polymer Sci. B Polymer Phys., 42, 3934—3942... 

Figure 4 Normalized resistance of individual electrospun HCSA doped polyaniline nanofihers (o) and cast film of the same polymer (A) to vapors of methanol. The response of the nanofibers is larger and is slightly faster than the cast film due to the larger surface to volume ratio of the fiber over the film. The arrows indicate the moment when the specified gas was introduced into the chamber.

Extremely low-dimensional conducting nanowires (as small as 3 nm in diameter) for use in nanoelectronics can be produced with the electrospinning technique [103]. Using template methods, insulating PLA fibers with an average diameter of 200-700 nm as core materials were electrospun and subsequently coated with thin 50-100 nm films of polyaniline or polypyrrole by in situ polymer deposition methods. The PLA core fibers decompose upon relatively mild thermal treatment under inert atmosphere, leaving... 

Electrospun Fibers of Inherently Conducting Polymers... 2-53 Electrospinning Process Electrospun Polyaniline Fibers ... 

Hong, K. H., K. W. Oh, and T. J. Kang (2005). Preparation of conducting nylon-6 electrospun fiber webs by the in situ polymerization of polyaniline. Journal of Applied Polymer Science 96(4) 983-991. 

---