Dynamic downcomer seal

The downcomer seal plate shown in Fig. 4.6 is an example of a dynamic downcomer seal. The Koch-Glitsch "Nye" tray also uses a dynamic downcomer seal to increase vapor-handling capacity. All trays with a dynamic downcomer seal suffer from two disadvantages ... 

For these reasons, high capacity trays using dynamic downcomer seals are best avoided on new columns. They should be reserved for use on retrofit tower expansion projects. 

The key to smooth operation of a CFB system is the effective control of the solids recirculation rate to the riser. The solids flow control device serves two major functions, namely, sealing riser gas flow to the downcomer and controlling solids circulation rate. Both mechanical valves or feeders (see Figs. 10.1(a) and (d)) and nonmechanical valves (see Figs. 10.1(b) and (c)) are used to perform these functions. Typical mechanical valves are rotary, screw, butterfly, and sliding valves. Nonmechanical valves include L-valves, J-valves (see Chapter 8), V-valves, seal pots, and their variations. Blowers and compressors are commonly used as the gas suppliers. Operating characteristics of these gas suppliers which are directly associated with the dynamics and instability of the riser operation must be considered (see 10.3.3.2). 

Recently, Pallares and Johnsson [106] presented an overview of the macroscopic semi-empirical models used for the description of the fluid dynamics of circulating fluidized bed combustion units. They summarized the basic modeling concepts and assumptions made for each model together with the major advantages and drawbacks. In order to make a structured analysis of the processes involved, the CFBC unit is often divided into 6 fluid dynamical zones like the bottom bed, freeboard, exit zone, exit duct, cyclone and downcomer and particle seal, which have been shown to exhibit different fluid dynamical behavior. 

---