Dissociation radical anions

Water-soluble peroxide salts, such as ammonium or sodium persulfate, are the usual initiators. The initiating species is the sulfate radical anion generated from either the thermal or redox cleavage of the persulfate anion. The thermal dissociation of the persulfate anion, which is a first-order process at constant temperature (106), can be greatly accelerated by the addition of certain reducing agents or small amounts of polyvalent metal salts, or both (87). By using redox initiator systems, rapid polymerizations are possible at much lower temperatures (25—60°C) than are practical with a thermally initiated system (75—90°C). 

The absolute rate of dissociation of the radical anion of /i-nitrobenzyl chloride has been measured as 4 x 10 s . The w-nitro isomer does not undergo a corresponding reaction. This is because the meta nitro group provides no resonance stabilization of the benzylic radical. 

NMR and visible spectra have established that a number of S-N anions are present in such solutions.The primary reduction products are polysulfides Sx, which dissociate to polysulfur radical anions, especially the deep blue 83 ion (/Imax 620nm). In a IM solution the major S-N anion detected by NMR spectroscopy is cycZo-[S7N] with smaller amounts of the [SSNSS] ion and a trace of [SSNS]. The formation of the acyclic anion 5.23 from the decomposition of cyclo-Sjl is well established from chemical investigations (Section 5.4.3). The acyclic anions 5.22 and 5.23 have been detected by their characteristic visible and Raman spectra. It has also been suggested that a Raman band at 858 cm and a visible absorption band at 390 nm may be attributed to the [SaN] anion formed by cleavage of a S-S bond in [SSNS]. ° However, this anion cannot be obtained as a stable species when [SsN] is treated with one equivalent of PPhs. 

Irradiation of the molecular radical anion of DESO, which has a yellow color, with light of X = 350-400 nm partially restores the red color and the ESR spectrum of the radical-anion pair. Similarly to the case of DMSO-d6 a comparison of the energetics of the photodissociation of the radical anion and dissociative capture of an electron by a DESO molecule permits an estimation of the energy of the hot electrons which form the radical-anion pair of DESO. This energy is equal to 2eV, similarly to DMSO-d6. The spin density on the ethyl radical in the radical-anion pair of DESO can be estimated from the decrease in hfs in comparison with the free radical to be 0.81, smaller than DMSO-d6. 

The yellow disulfide radical anion and the briUiant blue trisulfide radical anion often occur together for what reason some authors of the older Hterature (prior to 1975) got mixed up with their identification. Today, both species are well known by their E8R, infrared, resonance Raman, UV-Vis, and photoelectron spectra, some of which have been recorded both in solutions and in solid matrices. In solution these radical species are formed by the ho-molytic dissociation of polysulfide dianions according to Eqs. (7) and (8). 8ince these dissociation reactions are of course endothermic the radical formation is promoted by heating as well as by dilution. Furthermore, solvents of lower polarity than that of water also favor the homolytic dissociation. However, in solutions at 20 °C the equilibria at Eqs. (7) and (8) are usually on the left side (excepting extremely dilute systems) and only the very high sensitivity of E8R, UV-Vis and resonance Raman spectroscopy made it possible to detect the radical anions in liquid and solid solutions see above. 

More recently, 84 may have been identified by ESR spectroscopy of solutions of Li2S ( >6) in DMF at 303 K. The lithium polysulfide was prepared from the elements in liquid ammonia. These polysulfide solutions also contain the trisulfide radical anion ( 2.0290) but at high sulfur contents a second radical at g=2.031 (Lorentzian lineshape) was formed which was assumed to be 84 generated by dissociation of octasulfide dianions see Eq. (32) [137],... 

Sulfur dissolves in liquid ammonia to give intensely coloured solutions. The colour is concentration-dependent and the solutions are photosensitive. Several S-N anions are present in such solutions.76,77 The primary reduction products are polysulfides Sx2, which dissociate to polysulfur radical anions, notably the deep blue S3 ion. In a 1M solution, the major S-N anion is cyc/0-[S7N] with smaller amounts of 21 and a trace of 20.76... 

The semiquinone radical dissociates to a proton and semiquinone radical anion in the polar solvent (water). 

Step 3. O2 binds, but can also dissociate. If it dissociates, the enzyme reverts to the heme Fe3+ resting state and generates superoxide radical anion in the process. 

One final example worth mentioning is the reductive alkylation/arylation with lithium and alkyl/aryl halides in liquid ammonia. This is a two-step process in which negatively charged nanotubes are formed via electron transfer from the metal. This step is relatively easy and fast due to the CNTs electron sink properties, and it enables exfoliation of the tubes through electrostatic repulsion in the second stage, the alkyl/aryl halides react with the charged tubes to form a radical anion which can dissociate into the alkyl radical and the halide anion, with the former species undergoing addition to the CNT sidewalls [42]. 

In cathodic cleavage, a C—X bond is mostly reduced to a radical anion that dissociates into a radical and an anion X . The radical is further reduced to an anion and protonated in the final step. 

The solvent effects on the C-Cl bond cleavage in the aromatic radical anions of 9-chloroanthracene, 3-nitrobenzyl chloride, and 3-chloroacetophenone were described by applying the Saveant model. The results showed that the bond dissociation energy is not strongly solvent dependent. 

The stability of radical anions of disulfides [RS—SR] and their ease of dissociation into thiolate anions and thiyl radical were studied as a function of pH with alkyl substituents of different structures ... 

Reaction rates for dissociative electron transfer processes are determined by the method of homogeneous electron transfer. The kinetic sequence is illustrated in Scheme 4.1, Linear sweep voltammetry is used to generate the radical-anion fi-om... 

Scliemc 4.1. Dissociative electron transfer using an aromatic radical-anion as electron relay... 

Experimental data (Figure 4.2) for the dissociative electron transfer between radical anions and the carbon-halogen bond in alkyl halides indicates a linear relationship between log(k ) and Ed over a wide range of reaction rates [5, 9]. Very fast reactions become controlled by the rate of diffusion of two species towards each other, when every close encounter gives rise to electron transfer. A parabolic... 

---