Disintegration, electrical

Three different types of furnaces are generally in use for calcination. The shaft furnace is considered to be the most suited for calcining coarse limestone. Furnaces of the rotary kiln type are used for handling materials of mixed particle sizes and lumps which disintegrate during the process. Calcination can be carried out in a fluidized bed-reactor for materials of small and uniform particle size. These furnaces are usually fired with gas, oil or coke in some cases electric heating is resorted to. 

The radon in the air i/as measured continuously by electroprecipitation of the positively charged Po-218 ions in an electric field (10 kV) on a surface barrier detector (Porstendorfer, et al., 1980). For this purpose the air i/as dried, filtered and sucked into an aluminium sphere ( 2 1) with a flowrate of 0.5 lmin-1. The counts due to Po-218 and Po-214 were proportional to the radon activity concentration. Their disintegrations were directly detected by alpha spectroscopy with an energy resolution of about 80 keV. The monitor could detect down to 5 Bq m 3 with a two hour counting time and 30 % statistical accuracy. 

Flat Sheets. Generally, the interface between a liquid sheet and air can be perturbed by aerodynamic, turbulent, inertial, surface tension, viscous, acoustic, or electrical forces. The stability of the sheet and the growth rate of unstable disturbances are determined by the relative magnitude of these forces. Theoretical and experimental studies 255112561 on disintegration mechanisms of flat sheets showed that the instability and wave formation at the interface between the continuous and discontinuous phases are the maj or factors leading to... 

Taylor, G.I. Disintegration of Water Drops in an Electric Field. Proc. Royal Soc. London A1964,280, 383-397. 

The mechanism of cathodic disintegration involves the formation of a metal alloy with a cation only deposited at high current densities and a large impressed electromotive force. Thus the disintegration of a lead cathode in alkaline solution is due to the formation of a lead sodium alloy which subsequently reacts with the water yielding a fine black dispersed lead suspension. This electrical dispersion... 

---