Direct transfer method, sterility

It is assumed in the direct transfer method under sterility tests that the recovery medium will allow for growth of all surviving microorganisms. The liquid medium in that test must serve to neutralize any antimicrobial properties of the test solution and to support the growth of the microorganisms. The treatment groups described above (antimicrobial neutralization for recovery on agar medium) can be used for validation of the recovery method, with the proportions of product and recovery medium varied to achieve adequate neutralization. 

The USP describes two general methods for conducting the test the direct transfer, or direct inoculation, method and the membrane filtration method. As the name indicates, the direct inoculation method involves the aseptic transfer of a sample of test product solution into the sterility test growth medium. To use this method, it must first be demonstrated that the product solution itself does not inhibit the growth of typical indicator microorganisms specified in the USP method. It should be self-evident why it is important to perform testing to negate the chance of product inhibition of possible microbial contaminants, as this is the purpose of the sterility test. The direct inoculation method, while not theoretically complex, requires the utmost technical precision and aseptic manipulation techniques for proper execution. As a consequence of the repetitive motions involved, it is prone to human error. 

A suitably sized solution preparation system similar to that mentioned under the previous sections can be used to provide material for bulk freeze drying. (Since product solutions can be sterile-filtered directly into the final container, microbial and particulate exposure will be minimized.) The sterile solution is subdivided into trays and placed into a sterilized freeze dryer. Aseptic transfer of sterile product in trays to the freeze dryer must be validated. After tray drying, the sterile product is aseptically transferred through a mill into suitably designed sterile containers. The preparation of sterile bulk material is usually reserved for those cases where the product cannot be isolated by more common and relatively less expensive crystallization methods. Due to recent advances in this field, a freeze drying process should be considered as a viable option. ... 

---