Direct schematic diagram

Fig. XI-4. Schematic diagram of the structure of an adsorbed polymer chain. Segments are distributed into trains directly attached to the surface and loops and tails extending into solution.

Figure Bl.24.1. Schematic diagram of the target chamber and detectors used in ion beam analysis. The backscattering detector is mounted close to the incident beam and the forward scattering detector is mounted so that, when the target is tilted, hydrogen recoils can be detected at angles of about 30° from the beam direction. The x-ray detector faces the sample and receives x-rays emitted from the sample.

The schematic diagram of the liquid-feed direct methanol fuel cell (DMFC) is shown in Figure 13.1. 

Fig. 1. Schematic diagram of semiconductor materials showing band gaps where CB and VB represent the conduction band and valence band, respectively and 0 and 0, mobile charge. The height of the curve represents the probabiUty of finding an electron with a given momentum bound to an N-isoelectronic impurity, (a) Direct band gap the conduction band minimum, F, is located where the electrons have 2ero momentum, ie, k = 0. The couples B—B, D—A, B—D, and B—A represent the various routes for radiative recombination. See text, (b) Indirect band gap the conduction band minimum, X, is located...

Fig. 5. Schematic diagram of an fticr cell. The direction of the magnetic field, B is shown by the arrow (1).

Fig. 6-11. Schematic diagram of the kraft pulping process (6). 1, digester 2, blow tank 3, blow heat recovery 4, washers 5, screens 6, dryers 7, oxidation tower 8, foam tank 9, multiple effect evaporator 10, direct evaporator 11, recovery furnace 12, electrostatic precipitator 13, dissolver, 14, causticizer 15, mud filter 16, lime khn 17, slaker 18, sewer.

Figure 2.11 Beta sheets are usuaiiy represented simply by arrows in topology diagrams that show both the direction of each (3 strand and the way the strands are connected to each other along the polypeptide chain. Such topology diagrams are here compared with more elaborate schematic diagrams for different types of (3 sheets, (a) Four strands. Antiparallel (3 sheet in one domain of the enzyme aspartate transcarbamoylase. The structure of this enzyme has been determined to 2.8 A resolution in the laboratory of William Lipscomb, Harvard University, (b) Five strands. Parallel (3 sheet in the redox protein flavodoxin, the structure of which has been determined to 1.8 A resolution in the laboratory of Martha Ludwig, University of Michigan, (c) Eight strands. Antiparallel barrel in the electron carrier plastocyanln. This Is a closed barrel where the sheet is folded such that (3 strands 2 and 8 are adjacent. The structure has been determined to 1.6 A resolution in the laboratory of Hans Freeman in Sydney, Australia. (Adapted from J. Richardson.)...

Figure 16.14 Schematic diagrams of three different viral coat proteins, viewed in approximately the same direction. Beta strands I through 8 form the common jelly roll barrel core, (a) Satellite tobacco necrosis virus coat protein, (b) Subunit VPl from poliovirus.

A simplified schematic diagram of transitions that lead to luminescence in materials containing impurides is shown in Figure 1. In process 1 an electron that has been excited well above the conduction band et e dribbles down, reaching thermal equilibrium with the lattice. This may result in phonon-assisted photon emission or, more likely, the emission of phonons only. Process 2 produces intrinsic luminescence due to direct recombination between an electron in the conduction band... 

Figure 6.12 Schematic diagram of the interface used for direct SFE-CEST coupling without a sample pre-concenti ation step 1, micro-LC pump 2, heated restrictor 3, six-port valve 4, direct by-pass to the CE unit 5, three-port valve 6, CE instmment. (from ref. 58).

Figure 14.4 Schematic diagram of the cliromatographic system used for the analysis of very low concentrations of sulfur compounds in ethene and propene CP, pressure regulator CF, flow regulator SL, sanrple loop R, restriction to replace column 2 VI, injection valve V2, tliree-way valve to direct the effluent of column 1 to either column 2 or the restriction column 1, non-polar- capillary column column 2, tliick-film capillary column SCD, sulfur chemiluminescence detector FID, flanre-ionization detector.

Figure 4-219 shows the schematic diagram of a servo-controlled inverted pendular dual-axis accelerometer. A pendulum mounted on a flexible suspension can oscillate in the direction of the arrows. Its position is identified by two detectors acting on feedback windings used to keep the pendulum in the median position. The current required to achieve this is proportional to the force ma, and hence to a. ... 

Fig. 10.8 Schematic diagram of cathodic protection using sacrificial anodes. In practice the anode, which will be mounted on a steel core, can be attached directly to the structure...

Figure 11. Schematic diagram of anodic polarization curve of passive-metal electrode when sweeping electrode potential in the noble direction. The dotted line indicates the polarization curve in the absence of Cl-ions, whereas the solid line is the polarization curve in the presence of Cl ions.7 Ep, passivation potential Eb, breakdown potential Epit> the critical pitting potential ETP, transpassive potential. (From N. Sato, J, Electrochem. Soc. 129, 255, 1982, Fig. 1. Reproduced by permission of The Electrochemical Society, Inc.)...

Figure 3. Schematic diagram of a direct methanol fuel cell working in an acidic medium.

Figure 8.22 Schematic diagram of the Suprex MPS/225 integrated aupercritical fluid extractor, cryogenically focused interface and supercritical fluid chromatogra d>. The bold lines represent the direction of fluid flow in the load and inject positions.

Figur 9.7 Schematic diagram of a high flow rate interface for direct fluid introduction into a modified chemical ionization source for SFC/MS. (Reproduced with permission from ref. 83. Copyright American Chemical Society).

Fig. 5.5.14 Schematic diagram showing how the double-phase encoded DEPT sequence achieves both spatial and spectral resolution within the reactor, (a) A spin-echo ]H 2D image taken through the column overlayed with a grid showing the spatial location within the column of the two orthogonal phase encoded planes (z and x) used in the modified DEPT sequence. The resulting data set is a zx image with a projection along y. In-plane spatial resol-ution is 156 [Am (z) x 141 [xm (x) for a 3-mm slice thickness. The center of each volume from which the data have been acquired is identified by the intersection of the white lines. The arrow indicates the direction of flow.

Fig. 2. A schematic diagram illustrating how a time delay, r, permits the product molecule of an A + BC reaction to rotate into the forward scattering direction. The frequency u) of the rotating complex is set by the angular momentum of the collision, J, and hence by the impact parameter, b.

---