Dipole moment systems

Assuming that the system has no pennanent dipole moment, tire existence ofP(t) depends on a non-stationary j induced by an external electric field. For weak fields, we may expand the polarization in orders of the perturbation. 

Adsorbates can physisorb onto a surface into a shallow potential well, typically 0.25 eV or less [25]. In physisorption, or physical adsorption, the electronic structure of the system is barely perturbed by the interaction, and the physisorbed species are held onto a surface by weak van der Waals forces. This attractive force is due to charge fiuctuations in the surface and adsorbed molecules, such as mutually induced dipole moments. Because of the weak nature of this interaction, the equilibrium distance at which physisorbed molecules reside above a surface is relatively large, of the order of 3 A or so. Physisorbed species can be induced to remain adsorbed for a long period of time if the sample temperature is held sufficiently low. Thus, most studies of physisorption are carried out with the sample cooled by liquid nitrogen or helium. 

In addition, there could be a mechanical or electromagnetic interaction of a system with an external entity which may do work on an otherwise isolated system. Such a contact with a work source can be represented by the Hamiltonian U p, q, x) where x is the coordinate (for example, the position of a piston in a box containing a gas, or the magnetic moment if an external magnetic field is present, or the electric dipole moment in the presence of an external electric field) describing the interaction between the system and the external work source. Then the force, canonically conjugate to x, which the system exerts on the outside world is... 

Infrared and Raman spectroscopy each probe vibrational motion, but respond to a different manifestation of it. Infrared spectroscopy is sensitive to a change in the dipole moment as a function of the vibrational motion, whereas Raman spectroscopy probes the change in polarizability as the molecule undergoes vibrations. Resonance Raman spectroscopy also couples to excited electronic states, and can yield fiirtlier infomiation regarding the identity of the vibration. Raman and IR spectroscopy are often complementary, both in the type of systems tliat can be studied, as well as the infomiation obtained. 

Laser Raman diagnostic teclmiques offer remote, nonintnisive, nonperturbing measurements with high spatial and temporal resolution [158], This is particularly advantageous in the area of combustion chemistry. Physical probes for temperature and concentration measurements can be debatable in many combustion systems, such as furnaces, internal combustors etc., since they may disturb the medium or, even worse, not withstand the hostile enviromnents [159]. Laser Raman techniques are employed since two of the dominant molecules associated with air-fed combustion are O2 and N2. Flomonuclear diatomic molecules unable to have a nuclear coordinate-dependent dipole moment caimot be diagnosed by infrared spectroscopy. Other combustion species include CFl, CO2, FI2O and FI2 [160]. These molecules are probed by Raman spectroscopy to detenuine the temperature profile and species concentration m various combustion processes. 

In order to describe the second-order nonlinear response from the interface of two centrosynnnetric media, the material system may be divided into tlnee regions the interface and the two bulk media. The interface is defined to be the transitional zone where the material properties—such as the electronic structure or molecular orientation of adsorbates—or the electromagnetic fields differ appreciably from the two bulk media. For most systems, this region occurs over a length scale of only a few Angstroms. With respect to the optical radiation, we can thus treat the nonlinearity of the interface as localized to a sheet of polarization. Fonnally, we can describe this sheet by a nonlinear dipole moment per unit area, -P ", which is related to a second-order bulk polarization by hy P - lx, y,r) = y. Flere z is the surface nonnal direction, and the... 

Figure Bl.25.12 illustrates the two scattering modes for a hypothetical adsorption system consisting of an atom on a metal [3]. The stretch vibration of the atom perpendicular to the surface is accompanied by a change m dipole moment the bending mode parallel to the surface is not. As explained above, the EELS spectrum of electrons scattered in the specular direction detects only the dipole-active vibration. The more isotropically scattered electrons, however, undergo impact scattering and excite both vibrational modes. Note that the comparison of EELS spectra recorded in specular and off-specular direction yields infomiation about the orientation of an adsorbed molecule.

Figure Bl.25.12. Excitation mechanisms in electron energy loss spectroscopy for a simple adsorbate system Dipole scattering excites only the vibration perpendicular to the surface (v ) in which a dipole moment nonnal to the surface changes the electron wave is reflected by the surface into the specular direction. Impact scattering excites also the bending mode v- in which the atom moves parallel to the surface electrons are scattered over a wide range of angles. The EELS spectra show the higlily intense elastic peak and the relatively weak loss peaks. Off-specular loss peaks are in general one to two orders of magnitude weaker than specular loss peaks.

Also produced in electronic structure sunulations are the electronic waveftmctions and energies F ] of each of the electronic states. The separation m energies can be used to make predictions on the spectroscopy of the system. The waveftmctions can be used to evaluate the properties of the system that depend on the spatial distribution of the electrons. For example, the z component of the dipole moment [10] of a molecule can be computed by integrating... 

Neumann, M. Dipole moment fluctuation formulas in computer simvilations of polar systems. Mol. Phys. 50 (1983) 841-858. 

The initial values, a, , are derived by correlations with dipole moments of a series of conjugated systems. The exchange integrals are taken from Abraham and Hudson [38] and are considered as being independent of charge. The r-charges are then calculated from the orbital coefficients, c,j, of the HMO theory according to Eq. (14). 

The quality of the r-charge values thus obtained has been demonstrated by the calculation of dipole moments of a series of 80 conjugated systems [39],... 

Only if the total charge on the system (q) equals zero will the dipole moment be unchanged Similar arguments can be used to show that if both the charge and the dipole moment ar zero then the quadrupole moment is independent of the choice of origin. For convenience the origin is often taken to be the centre of mass of the charge distribution. 

---