Diffusive samplers mass transfer

In the ideal case the resistance to mass transfer of a diffusive sampler is confined to the stagnant air gap between the sampling face of the device and the surface of the collecting sorbent material (Van den Hoed and Van Asselen, 1991). Then the mass flow through the sampler can be described by Fick s first law of diffusion... 

An important performance characteristic of passive samplers that operate in the TWA regime is the diffusion barrier that is inserted between the sampled medium and the sorption phase. This barrier is intended to control the rate of mass transfer of analyte molecules to the sorption phase. It is also used to define the selectivity of the sampler and prevent certain classes (e.g., polar or nonpolar compounds) of analytes, molecular sizes, or species from being sequestered. The resistance to mass transfer in a passive sampler is, however, seldom caused by a single barrier (e.g., a polymeric membrane), but equals the sum of the resistances posed by the individual media (e.g., aqueous boundary layer, biofilm, and membrane) through which analyte diffuses from the bulk water phase to the sorption phase.19 The individual resistances are equal to the reciprocal value of their respective mass transfer coefficients and are additive. They are directly proportional to the thickness of the barrier... 

The substance-specific kinetic constants, kx and k2, and partition coefficient Ksw (see Equations 3.1 and 3.2) can be determined in two ways. In theory, kinetic parameters characterizing the uptake of analytes can be estimated using semiempirical correlations employing mass transfer coefficients, physicochemical properties (mainly diffusivities and permeabilities in various media), and hydro-dynamic parameters.38 39 However, because of the complexity of the flow of water around passive sampling devices (usually nonstreamlined objects) during field exposures, it is difficult to estimate uptake parameters from first principles. In most cases, laboratory experiments are needed for the calibration of both equilibrium and kinetic samplers. 

---