Differential scanning calorimetry sublimation

The enthalpies of phase transition, such as fusion (Aa,s/f), vaporization (AvapH), sublimation (Asut,//), and solution (As n//), are usually regarded as thermophysical properties, because they referto processes where no intramolecular bonds are cleaved or formed. As such, a detailed discussion of the experimental methods (or the estimation procedures) to determine them is outside the scope of the present book. Nevertheless, some of the techniques addressed in part II can be used for that purpose. For instance, differential scanning calorimetry is often applied to measure A us// and, less frequently, AmpH and AsubH. Many of the reported Asu, // data have been determined with Calvet microcalorimeters (see chapter 9) and from vapor pressure against temperature data obtained with Knudsen cells [35-38]. Reaction-solution calorimetry is the main source of AsinH values. All these auxiliary values are very important because they are frequently required to calculate gas-phase reaction enthalpies and to derive information on the strengths of chemical bonds (see chapter 5)—one of the main goals of molecular energetics. It is thus appropriate to make a brief review of the subject in this introduction. 

Two papers reported powder pattern crystallographic results. The paper by Santos et al. (7) stood out from the rest because it presented a collection of more classical physical chemistry experiments. In this paper the authors described the use of micro-combustion calorimetry, Knudsen effusion to determine enthalpy of sublimation, differential scanning calorimetry, X-ray diffraction, and computed entropies. While this paper may provide some justification for including bomb calorimetry and Knudsen cell experiments in student laboratories, the use of differential scanning calorimetry and x-ray diffraction also are alternatives that would make for a crowded curriculum. Thus, how can we choose content for the first physical chemistiy course that shows the currency of the discipline while maintaining the goal to teach the fundamentals and standard techniques as well ... 

After a multicomponent aqueous solution has been freeze-concentrated to the limit and the ice has been sublimed, any residual unfrozen water must be removed from the remaining solid solution by diffusion, desorption and evaporation (transfer to the condenser). This process is termed secondary drying . For an amorphous preparation, the amount of unfrozen water remaining after the removal of ice may be typically 20-30% w/w, but much higher values, even >50% w/w, have been found in some formulations. Attempts are on record to measure the amount of water that remains in the freeze-concentrated solution phase at 7, mainly by differential scanning calorimetry but such... 

---