Differential scanning calorimetry, hydrogen

Fig. 5.11 Melting temperature of rapidly crystallized fractions of copolymers of ethylene as determined by differential scanning calorimetry hydrogenated poly(butadiene) (A), ethylene-vinyl acetate ( ), diazoalkane copolymer with propyl side groups (A), ethylene-butene copolymer ( ), ethylene-octene copolymer ( , a).(74)...

The modified NBR samples were characterized by differential scanning calorimetry [11,78-80,98]. The glass-transition temperature (T ) decreased with the level of hydrogenation. In the case of HFNBR, Tg increased with an increase in the addition of aldehyde groups to the polymer chain. Thermogravimetric analysis of the modified polymers have also been carried out [15]. 

ADMET polymers are easily characterized using common analysis techniques, including nuclear magnetic resonance ( H and 13C NMR), infrared (IR) spectra, elemental analysis, gel permeation chromatography (GPC), vapor pressure osmometry (VPO), membrane osmometry (MO), thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The preparation of poly(l-octenylene) (10) via the metathesis of 1,9-decadiene (9) is an excellent model polymerization to study ADMET, since the monomer is readily available and the polymer is well known.21 The NMR characterization data (Fig. 8.9) for the hydrogenated versions of poly(l-octenylene) illustrate the clean and selective nature of ADMET. 

TGA analysis shows that polymer degradation starts at about 235°C which corresponds to the temperature of decomposition of the cellobiose monomer (m.p. 239°C with decom.). Torsion Braid analysis and differential scanning calorimetry measurements show that this polymer is very rigid and does not exhibit any transition in the range of -100 to +250 C, e.g. the polymer decomposition occurs below any transition temperature. This result is expected since both of the monomers, cellobiose and MDI, have rigid molecules and because cellobiose units of the polymer form intermolecular hydrogen bondings. Cellobiose polyurethanes based on aliphatic diisocyanates, e.g. HMDI, are expected to be more flexible. 

Harris EE, Adkins H (1938) Reactions of hydrogen with lignin Pap Trade J 107(20) 38-40 Hatakeyama H, Kubota K, Nakano J (1972) Thermal analysis of lignin by differential scanning calorimetry Cellul Chem Technol 6 521-529... 

In contrast to polymerisates, polycondensates can not be depolymerized under inert conditions. Decomposition usually leads to the destruction of the chemical structure and the monomers. The thermal decomposition of PET starts at about 300°C in an inert atmosphere [25]. Between 320 and 380°C the main products are acetaldehyde, terephthalic acid, and carbon oxides under liquefaction conditions. The amounts of benzene, benzoic acid, acetophenone, C1-C4 hydrocarbons, and carbon oxides increase with the temperature. This led to the conclusion that a P-CH hydrogen transfer takes place as shown in Eigure 25.8 [26]. Today the P-CH-hydrogen transfer is replaced as a main reaction in PET degradation by several analytic methods to be described in the following sections. The most important are thermogravimetry (TG) and differential scanning calorimetry (DSC) coupled with mass spectroscopy and infrared spectroscopy. 

---