Data Based on Pilot Plant Work

To keep ratios of impellers, gas bubbles and solid clumps in the fermentation related to full scale, the impeller size and blade width in the small scale must always have a physical dimension two or three times bigger than the particle size of concern. 

It is possible to model the fermentation biological process from a fluid mechanics standpoint, even though the impeller is not related properly geometrically to the gas-liquid mass transfer step. Thus, one scale of pilot plant might be usable for one or two of the fermentation mass transfer steps, and/or chemical reaction steps, but might not be suitable for analysis of other mass transfer steps. The decision, then, is based on how suitable existing data are for any steps which are not modeled properly in the pilot plant. 

It may also not be possible to duplicate all of the desired variables in each run, so a series of runs may be required changing various relationships systematically and then a synthesis made of the overall results. 

One variable in particular is important. The linear superficial gas velocity should be run in a few cases at the levels expected in the full-scale plant. This means that foaming conditions are more typical of what is going to happen in the plant and the fermenter should always be provided with enough head space to make sure the foam levels can be adequately controlled in the pilot plant. As a general rule, foam level is related to the square root of the tank diameter on scaleup or scale-down. 

In duplicating maximum impeller zone shear rates on a small scale, there may be a very severe design problem in the mechanics of the mixer, or the shaft speed, mechanical seals and other things. This means that careful consideration must be given to the type of runs to be made and whether the pilot plant or the semi-work-scale equipment must be available at all times to duplicate the maximum impeller zone shear rates in the plant or whether this sort of data will be obtained on a different type of unit dedicated to that particular variable. 

---