Crystal growth mixed control

The zinc salt and BaS solutions are mixed thoroughly under controlled conditions (vessel geometry, temperature, pH, salt concentration, and stirring speed, see (a) in Fig. 20). The precipitated raw lithopone does not possess pigment properties. It is filtered off (b2) and dried (c) ca. 2 cm lumps of the material are calcined in a rotary kiln (d) directly heated with natural gas at 650-700 °C. Crystal growth is controlled by adding 1-2 wt% NaCl, 2 wt % Na2S04 and traces of Mg2 + (ca. 2000 ppm), and K+ (ca. 100-200 ppm). The temperature profile and residence time in the kiln are controlled to obtain ZnS with an optimum particle size of ca. 300 nm. 

Nielsen, A.E. (1959b) The kinetics of crystal growth in barium sulphate precipitation. 111. Mixed surface reaction and diffusion-controlled rate of growth. Acta Chem. Scand., 13, 1680-1686. 

Numerous kinetic studies have been made of the spontaneous precipitation of calcium phosphates from solutions containing concentrations of lattice ions considerably in excess of the solubility values (33, 34). Although attempts, are usually made to control the mixing of reagent solutions, it is difficult to obtain reproducible results from such experiments since chance nucleation of solid phases may take place on foreign particles in the solution. Many of these difficulties can be avoided by studying the crystal growth of well-characterized seed crystals in metastable supersaturated solutions of calcium phos.phate. 

All these treatments exert their effect by controlled crystal growth, e.g. larger, fewer crystals adsorb less liquid fat and there is less formation of mixed (liquid-solid) crystals due to reduced supercooling. 

---