Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Crow’s feet

What stops me Perhaps it is queasiness about the surgeon s scalpel. Risks accompany any kind of surgery. Perhaps I find the idea of paralyzing my facial muscles somewhat repellent and a betrayal of the emotions I have experienced—the joys and loses of a lifetime—that are (30) written in those crow s feet and worry fines. Perhaps yet, it is my earlier feminist fervor and idealism—a remnant of my youth that I believe is worth preserving more than wrinkle-free skin. [Pg.104]

Neutron activation of the ceramic glazes was conducted at MURR. In addition to the ceramics an unglazed sherd and a crow s foot recovered during the survey of die Deh Luran Plain was also included in the INAA sample. In Middle Eastern kilns, glazed bowls are fired in stacks (6). Crow s feet are unglazed clay triangular-shaped objects about 5 cm. across that are placed... [Pg.430]

The crow s foot could not be attributed to any of the paste compositional groups. Glazed bowls are known to be transported in stacks with the Crow s Feet still in place to prevent breakage (32). It is likely that the crow s foot does not represent the local production of glazed pottery, but is possible evidence of trade. However, it is still possible that the crow s foot could have been made from a different paste than the glazed pottery and be a local product. [Pg.433]

If banks are not rotating correctly there can be entrapment of air in the material—and this will give rise to marks in the surface of the film known in the trade by many names, including tick marks and crow s feet . The variety of different names for such faults indicates just how common they are. [Pg.56]

Botulinum toxin, used alone, would only partially improve the areas around the eyes, lips and cheeks. A surgical facelift would tighten the neck and the cheeks, but it would not treat the crow s feet satisfactorily and would have no effect at all on the wrinkles on the lips and the overall skin quality. A light peel would only improve skin quality and even out skin tone, but would not get rid of the wrinkles. A peel to the papillary dermis would have a similar and more noticeable effect, but would not get rid of these deep and long-standing wrinkles. An experienced... [Pg.38]

Full-face phenol (Lip Eyelid formula) (a) before and (b) 30 days after the peel. The combination of botulinum toxin and phenol work together on the forehead, crow s feet, frown lines and sometimes wrinkles on the upper lip. [Pg.233]

Expression lines on the forehead and between the eyebrows and crow s feet have a natural tendency to recur partially and rapidly, even after a phenol peel. A botulinum toxin injection before the peel stops expression lines imprinting themselves on the skin as it renews itself, and this combination is very satisfactory, improving results significantly. The botulinum toxin should be injected 1 week before the peel so that new collagen can be synthesized on an immobile dermis. [Pg.234]

Before (a) and after (b) a full-face phenol peel (Lip Eyelid formula) a combination of yellow skin, wrinkles, fine lines and lentigines in a patient who smokes. Thirty days after the peel the erythema is normal. The patient is not wearing any make-up. Botulinum toxin was injected 8 days before the peel (forehead, frown lines and crow s feet). [Pg.237]

Botulinum toxin should be injected 1 week before the peel into forehead or glabellar wrinkles, crow s feet, lip wrinkles or radial wrinkles around the outer canthus of the upper eyelid. Blocking the muscles allows the skin to regenerate more evenly. The results will be of better quality and longer lasting. This is also the ideal moment to shave off any... [Pg.253]

The skin of the forehead is thoroughly anesthetized by the nerve blocks, and the phenol application should extend slightly into the temporal zone. Patients should be warned that they will feel a burning sensation on the temples for 15-20 seconds as the phenol is applied to this unanesthetized area. The temporal regions are treated gradually up to a virtual horizontal line that goes through the center of the pupils. The extension zone includes part of the wrinkles of the crow s feet the phenol is first applied at the base of these wrinkles the left hand stretches the skin to make it easier to reach the base of the wrinkles with the applicator. The peel solution is then applied to the rest of the area. [Pg.278]

Patients should be made fully aware of the limitations of their treatment. They should be shown photographs - and not necessarily the ones showing the best results. It is always essential to talk with patients before treatment to find out what they want and make sure they get the results they are looking for. It would be pointless to suggest a series of superficial peels to patients who want to get rid of crow s feet, when a botulinum toxin injection would provide them with the quick results they want. False hopes always create problems for the doctor that raised them. Some patients disappointment can turn into a nightmare for the doctor. [Pg.316]

Amphoteric surfactants offer an excellent degree of lubrication, corrosion inhibitor, and wetting action and provide a protective colloid for silk and wool processing. The major uses of amphoterics are in the scouring and dyeing of protein fibres to prevent chafing, crack marks and crow s feet. Amphoterics are comparatively expensive and some of them are not heat stable and hence cannot be used at elevated temperature. [Pg.99]

It has vertical ribs (wales) on the face and courses (horizontal ribs, cf crow s feet) on the back. A tricot knitting machine has a flat bed, with each warp yarn knitted by one needle and all needles (normally beard type) mounted in one needle bar and acting in unison. [Pg.877]

Within a given sheet, surfaces showed areas that had undergone slate-like flaking after they were exposed to maximum environmental load as well as crack- and scale-free areas that remained completely clear. In between, there are clear transitional zones with typical microcracks in the form of cracks or crow s feet and small, insular, scaly surface segments. Since composition and prehistory can be assumed to be the same within one sheet, different external loads were imposed during service. Table 5.6 [678]. [Pg.483]


See other pages where Crow’s feet is mentioned: [Pg.431]    [Pg.32]    [Pg.602]    [Pg.12]    [Pg.13]    [Pg.185]    [Pg.637]    [Pg.637]    [Pg.485]    [Pg.216]    [Pg.232]    [Pg.66]    [Pg.145]   
See also in sourсe #XX -- [ Pg.38 ]

See also in sourсe #XX -- [ Pg.216 , Pg.232 ]




SEARCH



Crowe

Crows

Footings

Foots

© 2024 chempedia.info