Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Interfaces cross-ply interply

Figure 7.8 Representative volume element used in modeling the intimate contact achievement of a cross-ply interply interface... Figure 7.8 Representative volume element used in modeling the intimate contact achievement of a cross-ply interply interface...
Considering the complexities involved in the formation of the cross-ply interface during consolidation, the cross-ply interply interface model predicted degrees of intimate contact... [Pg.226]

Figure 7.18 shows the consolidation time versus consolidation pressure for unidirectional and cross-ply interply interfaces. As can be seen from both figures, the consolidation time decreases rapidly as pressure increases. Above 1000 kPa for T300/P1700 and 500 kPa for APC-2, increases in the consolidation pressure do not significantly decrease consolidation time. [Pg.229]

The most efficient approach to measuring intimate contact of a multiple ply composite laminate would probably be to first use the C-scan technique or some other nondestructive method to determine the location of any flaws in the panel. The cross-sections of the panel that contain the flaws can then be examined by preparing optical micrographs of those areas, and the interply interface examined for complete contact. [Pg.223]


See other pages where Interfaces cross-ply interply is mentioned: [Pg.214]    [Pg.218]    [Pg.218]    [Pg.219]    [Pg.220]    [Pg.226]    [Pg.228]    [Pg.214]    [Pg.218]    [Pg.218]    [Pg.219]    [Pg.220]    [Pg.226]    [Pg.228]   
See also in sourсe #XX -- [ Pg.218 , Pg.220 , Pg.226 , Pg.228 ]




SEARCH



Cross-ply

Interply

Interply interface

Plies

Ply interfaces

© 2024 chempedia.info