Coupled oligomer technique

We recently have reported our initial studies on step-growth block copolymers containing segments of poly (aryl ethers) and poly (aryl carbonates) (9,10). The multiblock [ A-B ]n block copolymers were prepared by phosgenation in methylene chloride/pyridine solution either by what was termed an in situ or by a coupled oligomer technique (JO). The choice of polycarbonates and poly (aryl ethers) for initial studies was based on the several considerations. Copolymerization is feasible since the end groups in the two oligomers can be identical, as shown in Structures 1 and 2. Considerable information is available in the... 

The use of separation techniques, such as gel permeation and high pressure Hquid chromatography interfaced with sensitive, silicon-specific aas or ICP detectors, has been particularly advantageous for the analysis of siUcones in environmental extracts (469,483—486). Supercritical fluid chromatography coupled with various detection devices is effective for the separation of siUcone oligomers that have molecular weights less than 3000 Da. Time-of-flight secondary ion mass spectrometry (TOF-sims) is appHcable up to 10,000 Da (487). 

On-line SFE-pSFC-FTIR was used to identify extractable components (additives and monomers) from a variety of nylons [392]. SFE-SFC-FID with 100% C02 and methanol-modified scC02 were used to quantitate the amount of residual caprolactam in a PA6/PA6.6 copolymer. Similarly, the more permeable PS showed various additives (Irganox 1076, phosphite AO, stearic acid - ex Zn-stearate - and mineral oil as a melt flow controller) and low-MW linear and cyclic oligomers in relatively mild SCF extraction conditions [392]. Also, antioxidants in PE have been analysed by means of coupling of SFE-SFC with IR detection [121]. Yang [393] has described SFE-SFC-FTIR for the analysis of polar compounds deposited on polymeric matrices, whereas Ikushima et al. [394] monitored the extraction of higher fatty acid esters. Despite the expectations, SFE-SFC-FTIR hyphenation in on-line additive analysis of polymers has not found widespread industrial use. While applications of SFC-FTIR and SFC-MS to the analysis of additives in polymeric matrices are not abundant, these techniques find wide application in the analysis of food and natural product components [395]. 

SEC-ESI-FTMS combines the size separation based technique of SEC with one of the most powerful mass spectrometric techniques of FTMS offering high mass accuracy (ppm), ultrahigh resolving power (>10(i) 6) and the capability to perform tandem mass spectrometry. The technique enables generation of oligomer elution profiles, which can be used for accurate calibration of standard SEC data. Coupling of SEC to ESI-MS is further described in ref. [710],... 

Advances in size-exclusion chromatography, coupled with refractive index, absorption, viscosity, and lightscattering detectors, and MALDI-ToFMS, have made it possible to accurately determine molecular weight distribution (oligomer profiling), even at the relatively low values of polymeric additives (up to about 5000 Da). Advances in column design, e.g. high-resolution PS/DVB columns (> 105 plates m-1) mean that SEC can provide a valuable alternative to conventional HPLC techniques for the separation of small molecules. 

An interesting procedure has been proposed for the synthesis of amylose-b-PS block copolymers through the combination of anionic and enzymatic polymerization [131]. PS end-functionalized with primary amine or dimethylsilyl, -SiMe2H groups were prepared by anionic polymerization techniques, as shown in Scheme 56. The PS chains represented by the curved lines in Scheme 56 were further functionalized with maltoheptaose oligomer either through reductive amination (Scheme 57) or hydrosilyla-tion reactions (Scheme 58). In the first case sodium cyanoborohydride was used to couple the saccharide moiety with the PS primary amine group. 

---