Corrosion Helmholtz layer

Current and potential distributions are affected by the geometry of the system and by mass transfer, both of which have been discussed. They are also affected by the electrode kinetics, which will tend to make the current distribution uniform, if it is not so already. Finally, in solutions with a finite resistance, there is an ohmic potential drop (the iR drop) which we minimise by addition of an excess of inert electrolyte. The electrolyte also concentrates the potential difference between the electrode and the solution in the Helmholtz layer, which is important for electrode kinetic studies. Nevertheless, it is not always possible to increase the solution conductivity sufficiently, for example in corrosion studies. It is therefore useful to know how much electrolyte is necessary to be excess and how the double layer affects the electrode kinetics. Additionally, in non-steady-state techniques, the instantaneous current can be large, causing the iR term to be significant. An excellent overview of the problem may be found in Newman s monograph [87]. 

For many practically relevant material/environment combinations, thennodynamic stability is not provided, since E > E. Hence, a key consideration is how fast the corrosion reaction proceeds. As for other electrochemical reactions, a variety of factors can influence the rate detennining step. In the most straightforward case the reaction is activation energy controlled i.e. the ion transfer tlrrough the surface Helmholtz double layer involving migration and the adjustment of the hydration sphere to electron uptake or donation is rate detennining. The transition state is... 

The potential for electrochemical corrosion in a boiler results from an inherent thermodynamic instability, with the most common corrosion processes occurring at the boiler metal surface and the metal-BW interface (Helmholtz double layer). These processes may be controlled relatively easily in smaller and simpler design boilers (such as dual-temperature, LPHW heating, and LP steam boiler systems) by the use of various anodic inhibitors. 

Figure 3.18 Formation of the electrical double layer of a surface in solution, showing the inner Helmholtz plane (IHP) and outer Helmholtz plane (OHP). Reprinted, by permission, from B. D. Craig, Fundamental Aspects of Corrosion Films in Corrosion Science, p. 4. Copyright 1991 by Plenum Press.

Figure 9-5. Schematic double layer model with corrosion inhibitor (AAAAA) in acidic solution, where IHP is the inner Helmholtz plane and OHP the outer Helmholtz plane.

---