Corrosion differential capacity

Basic to establishing whether power recovery is even feasible, let alone economical, are considerations of the flowing-fluid capacity available, the differential pressure available for the power recovery, and corrosive or erosive properties of the fluid stream. A further important consideration in feasibihty and economics is the probable physical location, with respect to each other, of fluid source, power-production point, and final fluid destination. In general, the tendency has been to locate the power-recoveiy driver and its driven unit where dictated by the driven-unit requirement and pipe the power-recoveiy fluid to and away from the driver. While early installations were in noncorrosive, nonerosive services such as rich-hydrocarbon absorption oil, the trend has been to put units into mildly severe seiwices such as amine plants, hot-carbonate units, and hydrocracker letdown. 

Production of differential aeration cell. A scatter of individual barnacles on a stainless steel surface creates oxygen concentration cells. The formation of biofilm generates several critical conditions for corrosion initiation. Uncovered areas will have free access to oxygen and act as cathodes, while the covered zones act as anodes. Underdeposit corrosion (crevice corrosion) or pitting can occur. Depending on the oxidizing capacity of the bacteria and the chloride ion concentration, the corrosion rate can be accelerated. However, the presence of a biofilm does not necessarily mean that there will always be a significant effect on corrosion. (Dexter)5... 

---