Conventional pressure relief valve vapor

Conventional pressure relief valve (vapor service)... 

If the superimposed back pressure is less than the calculated critical flow pressure, the capacity of a conventional PR valve in vapor service is unaffected and back pressure is not a factor. However, builtup back pressure on a conventional pressure relief valve will affect its flow capacity and operating characteristics, and should not exceed 100% of its set pressure. If total back pressure (superimposed plus built-up) is greater than the calculated critical flow pressure, the capacity of a conventional PR valve in vapor service is affected, and total back pressure is incorporated into the sizing procedure. Any back pressure reduces the capacity of a conventional PR valve in liquid service, and... 

Conventional Flare System - The majority of pressure relief valve discharges which must be routed to a closed system are manifolded into a conventional blowdown drum and flare system. The blowdown drum serves to separate liquid and vapor so that the vapor portion can be safely flared, and the separated liquid is pumped to appropriate disposal facilities. The blowdown drum may be of the condensible or noncondensible type, according to the characteristics of the streams entering the system. Selection criteria, as well as the design basis for each type of blowdown drum, are detailed later in this volume. The design of flares, including seal drums and other means of flashback protection, is described later. 

Figure 5-5. Constant back pressure sizing factor, for conventional safety relief valves in vapor or gas service. (API Recommended Practice 520, Sizing, Selection and Installation of Pressure Relieving Devices in Refineries, Part 1, 5th ed., 1990. Reprinted courtesy of the American Petroleum Institute.)...

Safety Relief Valve - A safety relief valve is an automatic pressure-relieving device suitable for use as either a safety valve or relief valve, depending on application. (In the petroleum industry it is normally used in gas and vapor service or for liquid.) Safety relief valves are classified as "Conventional" or "Balanced", depending upon the effect of back pressure on their performance. 

---