Continuous pulsed, high power

Laser pyrolyzers are practically the only type of radiative heating pyrolyzer with certain applicability. Attempts were made in the past to use a strong light/heat source and focus the beam with lenses [20] to achieve the desired power output. However, the laser as a radiative energy source is much more convenient. The laser beam can be focused onto a small spot of a sample to deliver the radiative energy. This provides a special way to pyrolyze only a small portion of a sample. A variety of laser types were used for pyrolysis purposes normal pulsed, Q-switched, or continuous wave (cw) [21], at different energy levels. More common are the normal pulsed high-power lasers. 

The transversely excited atmospheric-pressure (TEA) laser, inherently a pulsed device rather than a continuous laser, is another common variety of carbon dioxide laser (33,34). Carbon dioxide—TEA lasers are an important class of high-power pulsed lasers. Pulse durations are in the submicrosecond regime peak powers exceed 10 MW. 

The mechanism of the iodide formation at platinum immersed in aqueous electrode was recently studied by laser-activated voltammetry in a channel flow cell system [161]. In this technique, solid deposits of iodine are removed from the electrode continuously by short nanosecond high-power laser pulses. By removing deposits on electrode surfaces within a channel flow cell, the voltammetric measurements becomes time independent and data can be analyzed and modeled quantitatively. Laser activation using a 10-Hz pulsed Nd YAG 532-nm laser was shown to remove bulk iodine from the electrode surface so that under sustained pulsed... 

---