Combustion Engineering, Inc

J. G. Singer, Combustion Engineering—A Reference Book on Combustion, A Reference Book on Fuel Burning and Steam Generation, Combustion Engineering, Inc., Windsor, Conn., 1991. 

Courtesy of Taylor Instrument Co. (now Taylor Instrument, Combustion Engineering, Inc.). 

Rotor blades also form an element of several external classifiers that are used in closed-circuit dry milhng. These are generally called mechanical air separators or classifiers. Examples are the Whirlwind classifier Sturtevant Inc.), the Gayco centrifugal separator Universal Road Machinery Co. (see Fig. 20-41), and the whizzer separator Raymond Division of Combustion Engineering Inc.). 

There are several mechanical air classifiers designed to operate in the superfine 10- to 90- Im range. Two of these are the Mikroplex spiral air classifier MP T Hosokawa Micron Powder Systems Div.) and the classifier which is an intregal part of the Hurricane pulverizer-classifier ABB Raymond Div, Combustion Engineering Inc.) described under Hammer Mills. Others are the Majac classifier Hosokawa Micron Powder Systems Div.), the Sturtevant Superfine Air Separator, and the Bradley RMC classifier. These also use a vaned rotor, but operate at higher speed with higher power input and lower throughput. 

FIG. 20-49 Raymond vertical miU. (Raymond Division, Combustion Engineering Inc.)... 

Fig. 30-2. Cutaway drawing of a flue gas desulfurization spray tower absorber. Source CE Power Systems, Combustion Engineering, Inc.

Combustion Engineering, Inc. (1966). Summary Report on the Nature of and Remedies for Explosive Reaction(s) Between Smelt and Water in Kraft Chemical Recovery Furnaces. Inst. Pap. Chem., Appleton, Wisconsin. 

A spokesman for Combustion Engineering, Inc. which is providing engineering procurement and construction services for the project, said it had advised suppliers to suspend any response to inquiries about meterials and equipment. Vendors were advised that the project is in a state of suspension." (2)... 

Combustion Engineering Inc., 200 West Monroe Street, Chicago, IL 60606... 

This report covers the work performed by Combustion Engineering, Inc. (C-E) under the Electric Power Research Institute (EPRI)... 

FIG. 27-20 Effect of moisture in coal on pulverizer capacity. Sufficient drying can be accomplished to restore capacity if air temperatures are high enough. [K = (°F + 459.7)71.8] (Combustion Engineer, Combustion Engineering Inc., New York, 1966.)... 

Ro-Tap Is a registered trademark of C-E Tyler. Combustion Engineering, Inc. SodIGraph Is a licensed trademark of MIcromerltics Corp,... 

Singer G, (Editor), (1981), Combustion fossil Power Systems, S edn., Combustion Engineering Inc., Windsor, pp. 3-1 to 3-33. 

---