Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Clear overlacquer

The basecoat is thirmed to a spray viscosity of 15-20 secs Ford No. 4 Cup, with fast evaporating solvents and this is applied in 2 thin coats, and allowed to dry for at least 15 minutes prior to application of the thermosetting clear overlacquer. [Pg.242]

The pigmented basecoat is applied by 2 wet on wet passes, for better appearance, to a film thickness of about 15 to 20 i,m. It is allowed to flash dry for 15 minutes prior to application of the clear overlacquer. The complete system is then cured for 30 min. at 120-130°C. [Pg.247]

A starting point formulation for a clear overlacquer suitable for vehicle refinishing polyester basecoats is given below. [Pg.342]

A typical clear, high build overlacquer for low bake curing is given below. It is suitable for use in a COB system over a basecoat. A typical basecoat formulation for COB application is given in the TSA chapter. [Pg.301]

See other pages where Clear overlacquer is mentioned: [Pg.219]    [Pg.342]    [Pg.219]    [Pg.342]    [Pg.286]    [Pg.549]    [Pg.242]    [Pg.247]    [Pg.263]   
See also in sourсe #XX -- [ Pg.219 , Pg.242 , Pg.342 ]



SEARCH



Clear

Clearness

© 2024 chempedia.info